-->
Multi Vendor source for apply underwater epoxy coatings: Splash Zone ®, Wet Dry 700, Corro Coat FC 2100 kevlar ® enhanced more - equivalent and replacement epoxies plus private label versions of these epoxies available - offshore marine wastewater pilings pools
Underwater Epoxies - Application & Information
|
Your Host and Tour Guide:
CONTACT INFO - ORDERING - HOW TO REACH US - PHONE/EMAIL/FAX INFO |
![]() |
|
.. CLICK HERE TO GOOGLE SEARCH OUR ENTIRE WEB SITE FOR KEY TERMS/WORDS .. |
PRODUCTS
NOTE: all these products are more commonly used on dry surfaces (metal, concrete, fiberglass,
wood) than they are underwater.
NOTE: WE HAVE TESTED (AND IN SOME CASES ACTUALLY SOLD) SIMILAR EPOXY PRODUCTS. WE THINK WET/DRY 700
IS ONE OF THE BEST. IT IS AVAILABLE IN 1 QUART AND 1 GALLON UNITS, UNLIKE THE COMPETITION WHICH GENERALLY HAS UNIT
SIZES NO SMALLER THAN 2 GALLONS. OUR SMALL SIZES (10 GALLON UNITS ARE ALSO AVAILABLE) PERMIT YOU TO TEST AND/OR
COMPLETE SMALL PROJECTS WITHOUT SPENDING A LOT. WE HAVE SIMILAR SMALL TEST KIT SIZES OF MANY OF OUR OTHER EPOXIES
AS WELL.
MSDS and data sheets can be found for most of these products at: www.epoxyproducts.com/datamsds.html
WET DRY 700 - This is the latest (post 2000) generation of underwater coatings. It is a Kevlar ® thickened epoxy. Mixable in temperatures down to approximately 50 - 55 degrees F. Non-hazmat to ship and can be shipped worldwide. Can be resold and private labeled. Color: white. 1 to 1 mix ratio. Sold in 1 gallon kits (0.5 gallon part A, 0.5 gallon part B) and 10 gallon kits.
Find this product in our industrial catalog - CLICK HERE
Find this product in our marine catalog - CLICK HERE
Corro Coat FC 2100 - This is the same new generation of underwater coatings as the Wet Dry 700 above. A brushable/rollable epoxy maintenance coating containing both kevlar (tm) and feldspar ceramic. Available in several versions (gel, high temp, novolac, etc.). The Low Temperature/Fast version will cure underwater (or in air) at temperatures down to 35 degree F (although difficult to mix if the epoxy is stored at those temperatures - for easier mixing store epoxy at 55 degrees F or greater). Produces a smooth finish. Non-hazmat to ship and can be shipped worldwide. Can be resold and private labeled. Color: light gray. Mix ratio is 2 to 1 by volume. Sold in 1.5 - 2.0 gallon units and 15 - 20 gallon units. Cannot be shipped by air.
Find this product in our industrial catalog - CLICK HERE
Find this product in our marine catalog - CLICK HERE
Find this product in our industrial catalog - CLICK HERE
Find this product in our marine catalog - CLICK HERE
NSP 120 - potable water version of Water Gard 300.
Find this product in our industrial catalog - CLICK HERE
Splash Zone A-788 - We have been as guilty as anyone with regards to making fun of the 'ORIGINAL" first generation underwater epoxy known as Splash Zone. It is hard to find, but many divers and marine repair companies still use it regularly, as they have for many, many years. Instead of denying the marketplace we decided to offer Splash Zone ourselves. Two part Splash Zone works sort of like bubble gum... 1:1 mix. Sold in 2 gallon kits.
Find this product in our industrial catalog - CLICK HERE
Find this product in our marine catalog - CLICK HERE
Epoxy Mortar Patch - We are pleased to introduce a low cost resin system that can be mixed with sand to for a patching epoxy 'cement' mortar for patching and filling underwater or on commercial floors. 10 pounds of sand (approx) per gallon of the epoxy will increase product volume by about 70 percent and add lots of strength and toughness. This product sets up quickly. Add your own sand (why pay $$ for a pail of sand with each unit of epoxy?). This epoxy cannot be shipped by air (UPS or motor freight only). Mostly used in the lower 48 states. Standard unit size is 1.5 gal kit. MORE OF A DAMP SURFACE REPAIR PRODUCT THAN AN UNDERWATER COATING.
Find this product in our industrial catalog - CLICK HERE
Quick Fix 2300 - our 5 minute underwater epoxy putty. Uses mercaptan for a fast cure, so has a sulfur smell. actual potlife is about 5 - 15 minutes, hard in 20 - 35 minutes. Great for that quick fix or quick 'glue job'. Easy 1 to 1 mix (cream and gray color mixes to a gray). Contains Kevlar (tm) micro-fibers. Non-hazmat to ship. Sold in 2 pint, 2 quart, and 1 gallon units. 10 gallon units upon request.
Find this product in our industrial catalog - CLICK HERE
Find this product in our marine catalog - CLICK HERE
Designed as a crack or seam sealer/filler for basements and marine applications this flexible epoxy also makes
an excellent waterproof, permanent bedding compound. The dark gray epoxy contains high density fillers that enter
and block crack and void spaces. Formulated for use in cool (55 degrees or above), damp environments. Its unique
viscosity is ideal for crack filling - thick to the point of barely brushable, yet just thick enough to possibly
use with a putty knife. Yes, it does work underwater too! MORE OF A DAMP SURFACE REPAIR PRODUCT THAN AN UNDERWATER
COATING. This epoxy cannot be shipped by air (UPS or motor freight only) so mostly used in the lower 48 states.
We didn't know were to put this in our catalog so it's actually in Section A-Epoxy paint section instead of here in our C_Thickened epoxy section. CLICK HERE TO VISIT
Water Activated - resin saturated fabric - pipe repair kits. Not actually an epoxy resin, these water activated pipe wrap kits come with rolls of resin saturated fabric in two sizes: 2 inch by 60 inch and 4 inch by 360 inch. Forms a rock hard wrap in air or in water.
Find this product in our industrial catalog - CLICK HERE
Find this product in our marine catalog - CLICK
HERE