Progressive Epoxy Polymers, Inc. - catalog section 3

-  buy thick epoxy /epoxy putty / epoxy glue "goo"

MARINE

NAVIGATION

BAR

Main Home Page ====>

*

Marine Home Page ====>

*

Marine Catalog Contents Page ====>

*

Marine Online Catalog Page ====>

*

Contact Page /Link to Storefront/Ordering

*

This is a Marine Page

(blue background)

HELP Page

Progressive Epoxy Polymers, Inc.

..

..

..

.YOU ARE HERE.

..

..

MSDS /DATA

No Sales Tax applied. Save Money, you're shopping in Tax Free New Hampshire


thick epoxy filler

Thick Epoxies for Repair - Purchase/Buy Here


We've been selling:   marine epoxy (boat building - wood / fiberglass repair) industrial coatings - garage paint -

underwater epoxies - thick putties - tabletop resins and supplies since the early 1990's


marine epoxy resin

SECTION THREE:

Epoxy Putty, Thick Epoxies etc.

wood / metal / fiberglass boat repair / construction

epoxy glue and adhesives

LINKS TO OTHER CATALOG SECTIONS LOCATED AT BOTTOM OF PAGE

CLICK HERE TO GOTO OUR USER NOTES SECTION: FEEDBACK FROM FOLKS WHO HAVE USED THIS AND OUR OTHER PRODUCTS.


PRODUCTS

 

WET / DRY 700 :


WET DRY 700™

PRODUCT PRO AND CON REVIEW

   
PRO KEVLAR(TM) BASED EPOXY PASTE THAT CAN BE USED UNDERWATER. NON-HAZMAT TO SHIP - GLUE, FILL, FAIR, REPAIR
CON CANNOT BE SHIPPED BY AIR

COMMERCIAL

"BEST PRODUCT"

WINNER

(CLICK HERE)


UNDERWATER EPOXY PUTTY PASTE / EPOXY GLUE
Visit our epoxy putty/thickener info (comparison) site - click here

The very latest generation of underwater epoxies, Wet Dry 700 is Kevlar (tm) filled, underwater (or dry surface) epoxy paste. Thick but workable at low temperatures. Use as a thick coating or repair paste, with or without fiberglass cloth. Easy 1:1 mix ratio. Color: white. Non-hazmat and available for export outside the USA.. A lot of our 1 quart kit sales are used for fiberglass swimming pool repairs underwater. This product is about wall mud thick. To make thicker (i.e. like bread dough) add some of our EZ thick thickener....

This is a favorite product around my house. This past weekend (8/26/06) I used it to attach a chimney cap to my metal chimney, fill in a rotten spot on my wooden picnic table, re-attach some trim work on my kayak, and waterproof the electrical wire connections on both a bilge pump and and outdoor speaker.

underwater epoxy applicatiion

Wet Dry 700 (white cream) used to attach - glue a float

to a semi-submerged rock in the middle of a lake

(DUE TO RECENT CLASSIFICATION CHANGES THIS PRODUCT CAN NO LONGER BE SHIPPED BY AIR AND/OR OUTSIDE THE USA)


1 gallon kit - $100

2 pint (1 quart) kit - $52 including shipping within the USA.

10 gallon kit - $950 ( call email to order)



This product contains superior Cycloaliphatic curing agents - CLICK HERE for more information.

More on Kevlar (tm) reinforced epoxies like this one CLICK HERE .



This product is one of our
UNDERWATER EPOXIES

CLICK HERE FOR VOC INFO & DATA SHEET & MSDS

QUICK PURCHASE THIS ITEM NOW

Several high volume, core Favorite Products have a Quick Purchase Option. This option allows you to skip going to our Contact Page and our Storefront Primary Page and takes you directly to the storefront category section where this product is located for purchase. All legal terms, conditions and disclaimers still apply. To access this Quick Purchase Option, click on the product name. --- Basic No Blush marine epoxy --- Bio Clear 810 --- Wet Dry 700 --- Aluthane --- Fumed Silica (thickener and fishing aid) ---

Jeff (1/2013)

"I cannot believe how incredible this Wet Dry 700 is. It's revolutionary. The original repair to my storm shelter would have lasted years if the shelter would just stop shifting around in the ground. DON'T STOP SELLING THIS STUFF!"




This product contains superior Cycloaliphatic curing agents - CLICK HERE for more information.




Russ wrote:

> Hi
>
> Just to let you know I used the sample Wet/ Dry kit and it did a great job fixing my problem. Had the boat in the water for 5 days and not a drop of water leaked in.
>
> Thanks Russ
>
> -----Original Message-----
>
> Russ wrote:
>
>> I have a 16' fiberglass boat that has a small leak in the keel . I would like to patch it but it never seems to get totally dry. Do you have a product that I can apply over a small area about 4" square with a small pin hole leak that stays wet. The boat is on a trailer.
>>
>> Thanks Russ

>


Thanks, Tim (2/09)

Paul,
I purchased a two part epoxy from you about a year ago to patch the bottom of a boat.

The boat was in the water. It still is holding up great!

----------

Paul:

Please allow me to thank you for your recent help regarding an underwater epoxy repair to take place at one of the many tanks at the ZZZ State Aquarium in ZZZZ. The work turned out to be a stunning success!

After receiving your recommended epoxy for the job one day earlier than we had expected (it arrived Wednesday instead of Thursday), our team of four commercial divers quickly assembled and headed to the Aquarium. This gave us one more day to perform our work.

We had purchased enough epoxy from you to test prior to completing the job, which was a great idea. It took us several batches before we were able to create a perfect match to the concrete interior of the tank. Once this was done and the formula perfected, our end result was a virtually invisible repair that was simply shocking to Aquarium personnel. In fact, when the President of the corporation that owns the Aquarium saw our work, he was unable to find the repairs... A true testament to your excellent advice and your wonderful products!

After considering this all weekend, we have decided to keep it a proprietary secret how we managed to create such a visually perfect repair... However, your advice - and two "accidents" with the epoxy (not to mention a tremendous amount of physical labor and many hours under water) - was the true secret to the success of the job.

We are amazingly pleased with the outcome, as is our direct client, the ZZZ Aquarium, it's volunteers and employees, and even one of our co-contractors. Everyone was impressed. To the best of my knowledge, this has never been successfully done before. This puts Deep South Divers at a considerable competitive advantage when it comes to underwater cosmetic repairs of public aquariums, water parks, and the like. I am confident that we will be considered "the" experts on the underwater repairs of such facilities in the future.

Thank you very much! We definitely will be doing more business with you - and are looking forward to it!

SeaJay (11/09)
Deep South Divers -- 843 252 4500 --- divers@deepsouthdivers.org ----- www.deepsouthdivers.org


"Your product is proving to be amazing!" - Wes - email 5/17/12


"This product saved my boat a year ago (underwater leak)and I used it for several other projects. Time for more. Thanks." -- Gary 8/2010


Boat Repair Case Studies using Wet Dry 700 (tm)

A kevlar (tm) thickened - underwater epoxy paste

(Yes, you can apply it underwater!)

www.epoxyproducts.com/repair.html


NEXT

PRODUCT

below


QUICK FIX 2300 :

QUICK FIX 2300™

PRODUCT PRO AND CON REVIEW

   
PRO FAST SETTING KEVLAR(TM) BASED EPOXY PASTE THAT CAN BE USED UNDERWATER. NON-HAZMAT TO SHIP
CON SLIGHT 'ROTTEN EGG' ODOR - SURFACE OF PART B WILL FORM HARD SKIN


"5 MINUTE" UNDERWATER EPOXY PUTTY PASTE:
Visit our epoxy putty/thickener info (comparison) site - click here

Our 5 minute underwater epoxy putty. Uses mercaptan for a fast cure, so has a sulfur smell. actual pot life is about 5 - 15 minutes, hard in 20 - 35 minutes. Great for that quick fix or quick 'glue job'. Easy 1 to 1 mix (cream and gray color mixes to a gray). Contains Kevlar (tm) micro-fibers. Non-hazmat to ship. Not recommended for structural repairs or emergency marine underwater repairs.


NON HAZMAT (CAN SHIP BY AIR AND/OR OUTSIDE THE USA)


10 gallon kit - $1125

1 gallon kit - $130

2 pint ( 1 quart) kit - $52 including shipping within the USA


CLICK HERE FOR VOC INFO & DATA SHEET & MSDS

This product is one of our UNDERWATER EPOXIES



NEXT

PRODUCT

below


QR 2400 :

QR 2400™

PRODUCT PRO AND CON REVIEW

   
PRO NEW GENERATION OF RUBBER LIKE EPOXY REINFORCED WITH KEVLAR(TM). CAN BE USED UNDERWATER. NON-HAZMAT TO SHIP
CON SANDS ONLY 'SO-SO' BEING SO SOFT


"RUBBER EPOXY UNDERWATER EPOXY PASTE:
Visit our epoxy putty/thickener info (comparison) site - click here

Our exclusive 'rubber' underwater epoxy putty. Normal to slow pot life. Easy 1 to 1 mix forms a dark brown rubber like epoxy surface. Contains Kevlar (tm) micro-fibers. Non-hazmat to ship.
NON HAZMAT (CAN SHIP BY AIR AND/OR OUTSIDE THE USA)


10 gallon kit - $1125

1 gallon kit - $130

2 pint (1 quart) kit - $52 including shipping within the USA

Repackage / Divide up into pint cans (1 pint of part A and 1 pint of Part B make a 1 Quart kit) - order Pint Cans in the Misc. Section of this catalog.

This product is one of our UNDERWATER EPOXIES

---- ORDER NOW via link to online storefront (section 5 - thickeners/fillers) ----


NEXT

PRODUCT

below


Crack Coat™ :SEAM SEALER, EPOXY ADHESIVE, AND BEDDING EPOXY

CRACK COAT™

PRODUCT PRO AND CON REVIEW

   
PRO The ideal epoxy glue or crack filling/covering gel
CON available only in 3 quart units - 2 to 1 mix ratio

Designed originally as a crack or seam sealer/filler for basements and marine applications this flexible epoxy also makes an excellent waterproof, permanent bedding compound as well as the ideal epoxy glue (see our glue page). The dark gray epoxy contains high density fillers that enter and block crack and void spaces. Formulated for use in cool (55 degrees or above), damp environments. Its unique viscosity is ideal for crack filling (and gluing!)- thick to the point of barely brushable, yet just thick enough to possibly use with a putty knife.

We didn't know were to put this in our catalog so it's actually in Section 4-Epoxy paint section instead of here in our 3_Putty epoxy section. CLICK HERE TO VISIT


We have a professional boat repair guy who travels around the country working on boats. He also fixes the 'repairs' of other professional boat guys (so he's darn good at what he does!). He uses this product on wooden boat seams. (He also likes our Premium No Blush epoxy). A nice, fast setting, flexible epoxy gel!

This product is unique enough that it has its own page - CLICK HERE.

3 quart kit - $72


This product is one of our UNDERWATER EPOXIES

CLICK HERE FOR VOC INFO & DATA SHEET & MSDS


NEXT

PRODUCT

below


Epoxy Cream™ :SMOOTH, CREAMY EPOXY PUTTY/GEL

EPOXY CREAM™

PRODUCT PRO AND CON REVIEW

   
PRO Long pot life, goes on nicely with a putty knife
CON Long set up time, milky white color only

I've been looking for an epoxy putty or gel that was easy/nice to apply, one that flowed off a putty knife without pulling and leaving behind a very smooth surface. It also needed to have a long pot life so I could work in decent size batches without worry that it would begin to set up. At the factory that makes it, they call this product Crack Filler. It's a good name for filling small cracks, dimples, or hollow areas. I used it recently to patch a cement cat in my garden that was cracked and crumbling (I could barely pick it up without it cracking more) from too many winter freeze - thaw cycles. A boat owner recently used it with great success to fill a mass of gel coat air bubbles that pot marked his hull.

Epoxy Cream is that product. Cannot be shipped by air.


1.5 gallon kit - $115

1.5 quart kit - $52 with free shipping in the lower 48

"WOW! Just completed one coat of ESP 155, then Epoxy Cream to fair, two more coats of 155. I'm delighted with the finish. I just didn't order enough.
Thanks for great advice." --- M.B. 9/2010 (boat repair project)



---- ORDER NOW via link to online storefront (epoxy - thick/putty) ----

CLICK HERE FOR VOC INFO & DATA SHEET & MSDS


NEXT

PRODUCT

below


Splash Zone A-788:


SPLASH ZONE™

PRODUCT PRO AND CON REVIEW

   
PRO THE ORIGINAL UNDERWATER EPOXY - NON HAZMAT TO SHIP
CON THICK LIKE CHEWING GUM - NEEDS HOT WEATHER TO EVEN GET OUT OF THE CAN


THE ORIGINAL UNDERWATER REPAIR EPOXY


We have been as guilty as anyone with regards to making fun of the 'ORIGINAL (A-788)" first generation underwater epoxy known as Splash Zone. It is hard to find, but many divers and marine repair companies still use it regularly, as they have for many, many years. Instead of denying the the marketplace we decided to offer Splash Zone ourselves, repackaged in small, end-user sizes. Two part Splash Zone works sort of like bubble gum. 1:1 mix.
 Also known as "Green Death', it has a cult following as a cylinder head repair epoxy. (google splash zone cylinder head epoxy).

2 gallon kit - $225

4 oz kit - $25 with free shipping in the lower 48 states - Try out the legend....

 

West Marine is perhaps the largest marine and boating supply store. They also sell this same Splash Zone™ product. Their 2009 catalog (page 221) lists a 2 gal kit for $279.99' Compare that to our price for 2 gallons!

This product has its own web page  SPLASH ZONE


This product is one of our UNDERWATER EPOXIES

CLICK HERE FOR VOC INFO & DATA SHEET & MSDS



How-To using thickened epoxy on a boat repair - Click Here


  EPOXY CREAM QUICK FIX 2300 WET DRY 700

SPLASH ZONE A-788

 
           
SHIPPING USA ground intl unrestricted air USA unrestricted air  USA ground  
 GEL SET TIME* hours 15 95    
COLOR milky dark gray white    


* POT LIFE/SET TIME and STANDARD COLOR page for many of our products) - CLICK HERE



CATALOG LINKS

SECTION ONE: marine - clear epoxies

SECTION TWO (this page): fillers thickeners additives

SECTION THREE: thickened epoxies, epoxy putties

SECTION FOUR: epoxy paints

SECTION FIVE: urethanes and non-epoxy coatings

SECTION SIX: non-skid deck coatings

SECTION SEVEN: marine repair products

SECTION EIGHT: misc. marine products


GOOGLE LOGO

CLICK HERE TO GOOGLE SEARCH OUR ENTIRE WEB SITE FOR KEY TERMS/WORDS




Progressive Epoxy Polymers, Inc.

www.epoxyproducts.com

Frog Pond Hollow

48 Wildwood Drive

Pittsfield, NH 03263


clear marine epoxy

Basic No Blush ™

#1 rated, formulated, clear marine epoxy. Sold to the public at distributor prices.
--Click Here-- .

####

keywords = epoxy paste,  putty, epoxy, buy, purchase

\