PROGRESSIVE

EPOXY POLYMERS, INC.

epoxyproducts.com

 

 

 

EPOXY - epoxyproducts.com

 

 

 

 

 

 

 

 


Home Commercial

DIY (non marine)

Epoxy CATALOG

SECTION C - THICKENED EPOXIES

EPOXY PUTTY


 

EPOXY - epoxyproducts.com

 

 

 


No Sales Tax applied. Save Money,  you're shopping in Tax Free New Hampshire


Click here - YouTube video. Learn about Progressive Epoxy Polymers Inc.



 

PRODUCTS COVERED IN THIS

ONLINE CATALOG SECTION

 

1) WET DRY 700

2) EPOXY CREAM

3) SPLASH ZONE A-788

4) CRACK COAT

 

thick epoxy filler

Thick Epoxies for Repair


BELOW ARE BRIEF "CATALOG LISTINGS" FOR THESE PRODUCTS

INCLUDING SOME GENERIC INFORMATION ON THE PRODUCT.

 

 

   

Thick Epoxies/paste/gels/putties

 

 

 

LARGEST SELECTION ANYWHERE

CONFUSED?  CALL 603 435 7199  talk/order

 

Wet Dry 700

BUY ONLINE NOW

STRONG HARD AND TOUGH - APPLY UNDERWATER

Kevlar (tm) feldspar ceramic reinforced epoxy. About wall mud or cake icing thick. One of our most popular products. Can be applied underwater with or without fiberglass cloth. Has saved leaking boats/pools. Often carried by boats going offshore. Color is off-white but quickly ambers to a golden color.

Available in quart and gallon units.

Epoxy Cream

BUY ONLINE NOW

NO PULLING OR DRAGGING

SLIDES OFF PUTTY KNIFE SMOOTHLY

Creamy yellow epoxy used for non structural fairing and filling of holes and voids. Unlike other thick epoxies it slides off a putty knife like a hot knife through butter without pulling or tugging the epoxy behind it. Stays somewhat soft for several days.

Available in 1.5 quart and 1.5 gallon units.

Crack Coat

BUY ONLINE NOW

SMOOTH AND FLEXIBLE

Dark Gray smooth and slick epoxy. About as thick as toothpaste. Uniquely flexible and will bend and move. Use on surfaces that need some "give" due to expansion and contraction, vibration, etc. Good for 'bedding' objects down. Can be applied on damp surfaces.

Available in three quart units.

Splash Zone A-788

ORIGINAL CHEWING GUM LIKE UNDERWATER EPOXY

NO LONGER AVAILABLE

Available in two quart and two gallon units.

 

 



1) WET DRY 700

** EMAIL //// ph 603.435.7199 EST ////  BUY ONLINE (two different online stores) /// RETURN TO CATALOG HOMEPAGE **

0% VOC --- Shipped UPS ground only. Only shipped within the lower 48 states


The very latest generation of underwater epoxies / epoxy glues , Wet Dry 700 is Kevlar (tm) filled, underwater (or dry surface) epoxy paste. Thick but workable at low temperatures. Use as a thick coating or repair paste, with or without fiberglass cloth. Easy 1:1 mix ratio. Color: white. A lot of our 1 quart kit sales are used for fiberglass swimming pool repairs underwater. This product is about wall mud thick. To make thicker (i.e. like bread dough) add some of our EZ thick thickener....

This is a favorite product around my house. This past weekend (8/26/06) I used it to attach a chimney cap to my metal chimney, fill in a rotten spot on my wooden picnic table, re-attach some trim work on my kayak, and waterproof the electrical wire connections on both a bilge pump and and outdoor speaker.


NOTE: WE HAVE TESTED (AND IN SOME CASES ACTUALLY SOLD) SIMILAR EPOXY PRODUCTS. WE THINK WET/DRY 700 IS ONE OF THE BEST. IT IS AVAILABLE IN 1 QUART AND 1 GALLON UNITS, UNLIKE THE COMPETITION WHICH GENERALLY HAS UNIT SIZES NO SMALLER THAN 2 GALLONS. OUR SMALL SIZES (10 GALLON UNITS ARE ALSO AVAILABLE) PERMIT YOU TO TEST AND/OR COMPLETE SMALL PROJECTS WITHOUT SPENDING A LOT. WE HAVE SIMILAR SMALL TEST KIT SIZES OF MANY OF OUR OTHER EPOXIES AS WELL.

 

 

This is one of our most unique and popular products and is used in endless application. I reach for WET DRY 700 for dozens of patch and repair projects.

 

This product contains superior Cycloaliphatic curing agents - CLICK HERE

More on Kevlar (tm) reinforced epoxies like this one CLICK HERE

This product is one of our UNDERWATER EPOXIES

UNDERWATER EPOXY PASTE - EPOXY PUTTY/GOO  Visit our epoxy putty/thickener info (comparison) site - click here

More on Kevlar (tm) reinforced epoxies like this one CLICK HERE .


Common applications: Patching holes voids and leaks, underwater repairs (pools, boats, tanks), rot repair, gluing, pipe wraps, vertical/overhead fiberglass repairs, marine blister repair, boatbuilding fillets, easy waterproof electrical connections, joining plywood sheets together




PRICING

EMAIL //// ph 603.435.7199 EST ////  BUY ONLINE


1 gallon kit - $168


2 pint (1 quart) kit - $88



Special Notes: the the factory will process and ship ANY volume amount over 10 gallons 



"I'll stick with my original plan to use the Wet Dry 700 since it's a nuclear reactor application, and I know of two other reactors that have successfully used it" - Jeff  12/16



LINK TO A SOMETIMES MASSIVE SITE SUB-PAGE INCLUDE KEY LINKS, CUSTOMER COMMENTS, TABLES PICTURES, ETC. FOR THIS PRODUCT. CLICK HERE. PLENTY TO READ AND STUDY! DATA AND MSDS SHEETS CLICK HERE




 

2) EPOXY CREAM

** EMAIL //// ph 603.435.7199 EST ////  BUY ONLINE (two different online stores) /// RETURN TO CATALOG HOMEPAGE **

0% VOC --- Shipped UPS ground only. Only shipped within the lower 48 states



I've been looking for an epoxy putty or gel that was easy/nice to apply. One that flowed off a putty knife without excessive pulling and leaving behind a very smooth surface. It also needed to have a long pot life so I could work in decent size batches without worry that it would begin to set up. At the factory that makes it, they call this product Crack Filler. It's a good name for filling small cracks, dimples, or hollow areas. I used it recently to patch a cement cat in my garden that was cracked and crumbling (I could barely pick it up without it cracking more) from too many winter freeze - thaw cycles. Boat owners use it to fill a mass of gel coat air bubbles that potmarked his hull.

Do you have water seeping through a CINDER BLOCK concrete wall in your basement? Most basement walls are pour concrete but some are stacked concrete blocks. These stacked block walls are cement and fly ash and tend to have large spaces ("vugs") or openings on the surface. The size of these holes varies from manufacturer to manufacturer. In any event, these 'openings' make concrete blocks difficult to waterproof and seal. Thin products drain out and paints of all kinds never seem to completely fill and seal the holes.  The best product to seal cinder block walls is our EPOXY CREAM product. It is a toothpaste like thickened epoxy gel that easily slides off a putty knife like a hot knife through butter. This makes it easy to fill cinder block vugs and give the block a smooth surface.

 


Common applications: filling tiny blisters, fairing compound




PRICING

EMAIL //// ph 603.435.7199 EST ////  BUY ONLINE


1.5 gallon kit - $149


1.5 quart kit - $68


(Special Notes): none


"WOW! Just completed one coat of ESP 155, then Epoxy Cream to fair, two more coats of 155. I'm delighted with the finish. I just didn't order enough.
Thanks for great advice." --- M.B. 9/2010 (boat repair project)



MSDS SHEETS CLICK HERE




 
 

3) SPLASH ZONE A-788

 

NO LONGER AVAILABLE EXCEPT IN 4 OZ KITS

 

This product has its own web page  SPLASH ZONE


This product is one of our UNDERWATER EPOXIES

SPLASH ZONE™

PRODUCT PRO AND CON REVIEW

   
PRO THE ORIGINAL UNDERWATER EPOXY - NON HAZMAT TO SHIP
CON THICK LIKE CHEWING GUM - NEEDS HOT WEATHER TO EVEN GET OUT OF THE CAN

 


Common applications: gap filling, underwater repair (off label engine piston repair)




PRICING


4 oz kit - $49 with free shipping in the lower 48 states - Try out the legend....





DATA AND MSDS SHEETS CLICK HERE




 
 

4) CRACK COAT

** EMAIL //// ph 603.435.7199 EST ////  BUY ONLINE (two different online stores) /// RETURN TO CATALOG HOMEPAGE **

VOC 108 g/cc  --- Epoxy Mastic - Shipped UPS ground only. Only shipped within the lower 48 states


Seam Sealer, Epoxy Adhesive and Bedding Epoxy - Epoxy Gel

 

Designed originally as a crack or seam sealer/filler for basements and marine applications this flexible epoxy also makes an excellent waterproof, permanent bedding compound as well as the ideal epoxy glue (see our glue page). The dark gray epoxy contains high density fillers that enter and block crack and void spaces. Formulated for use in cool (55 degrees or above), damp environments. Its unique viscosity is ideal for crack filling (and gluing!)- thick to the point of barely brushable, yet just thick enough to possibly use with a putty knife.


We have a professional boat repair guy who travels around the country working on boats. He also fixes the 'repairs' of other professional boat guys (so he's darn good at what he does!). He uses this product on wooden boat seams. A nice, fast setting, flexible epoxy gel!

 

This product is unique enough that it has its own page - CLICK HERE.

READ MORE ABOUT CRACK COAT EPOXY GEL AT: WWW.PAINTS-COATINGS-EPOXIES.COM/A_crackcoat.html


Common applications: flexible seam filler




PRICING

EMAIL //// ph 603.435.7199 EST ////  BUY ONLINE


3 quart kit - $159




 DATA AND MSDS SHEETS CLICK HERE

Quick access to the combined data - technical

document for WET DRY 700 EPOXY

can be found at: Click Here - epoxyfacts.com

 

 



SECTION LINKS

Your are currently in Section C

(thick epoxies)


Section A EPOXY PAINTS


Section B FLOOR EPOXIES (regular and non-skid products)


Section C THICKENED EPOXIES - EPOXY PUTTIES, ETC. (you are here)


Section D CLEAR TWO PART EPOXIES


Section E NON-EPOXY PAINTS COATINGS SEALERS


Section F MIX-IN ADDITIVES


Section G OTHER PRODUCTS


Section H SURFACE PREPARATION PRODUCTS


Section I MISC. ACCESSORIES



Legal Stuff / Returns


NOTICE: Legal notices, Terms of Service, warranty information, disclaimers, health warnings, etc. are required reading before using web site, ordering and/or using Products. Any such use and/or ordering, online or by telephone, shall constitute acceptance and knowledge of all such terms. CLICK HERE  to access these terms. Please note: Whenever you purchase from this web site, and with each new purchase, you are granting us full and complete permission to add you to our email newsletter list at our option.


RETURNS: call or email for authorization to return. Returns are subject to a 25% restock fee. Customer pays return shipping and must comply with federal DOT shipping requirement/labeling for hazmat epoxies under penalty of fines and legal action.



Progressive Epoxy Polymers, Inc.  Pittsfield, NH 03263  - 603-435-7199 - email -

EPOXY PAINTS AND RESIN SYSTEMS - 1 AND 2 PART URETHANES - COATING SUPPLIES


Navigation Bar frame replacement CLICK HERE mobile friendly key site links