HELP!

* PROGRESSIVE EPOXY POLYMERS, INC.

INDUSTRIAL/COMMERICAL CATALOG SUB-PAGE *


CONTACT INFO - ORDERING - HOW TO REACH US - PHONE/EMAIL/FAX INFO



LINKS TO OTHER CATALOG SECTIONS LOCATED AT BOTTOM OF PAGE


Already know what you want?

Goto our 1-line product/price summary page MARINE or INDUSTRIAL



SECTION G: Other Products

also see our Misc. Section I: for rollers, brushes, etc.


How our epoxies saved a sinking yacht in Papua New Guinea - CLICK HERE for details



Water-Activated Pipe-Wrap: KEEP ONE OR TWO KITS ON BOARD/AT HOME TO FIX THOSE PLUMBING LEAKS AND/OR REINFORCE THOSE OLD RUBBER HOSES -- A CHEAP QUICK FIX!

Lots of companies sell water activated, polyurethane resin/fiberglass cloth pipe wrap kits. They have become mainstay repair products in industrial setting, among homeowners, and aboard pleasure and commercial craft. These fiberglass tape kits are used to repair plumbing pipes, PVC pipes, rubber and plastic tubing, fiberglass and other metallic piping. Can be applied even underwater! Handles temperatures from steam systems to engine mufflers. Resists fuels and hydraulic fluids. Handles pressures up to 600 psi (for higher pressures use our epoxies and fiberglass cloth). Our kits include a fast setting epoxy putty to plug the hole or leak prior to wrapping, as well as gloves to protect your hands. Keep a kit or two around for those sudden emergencies or to simply reinforce or strengthen all sorts of piping and tubing. We're much cheaper than all or most of our competitors such as Stop-It (tm) etc.

Your other option is to use the fiberglass tape above and usually our WET DRY 700 epoxy putty to create an epoxy pipe wrap. This is a stronger system than the water activated wraps and is often used for large pipe repair/wrap projects in industrial plants. See our page - www.epoxyproducts.com/pipewrap.html for more details.


Visit our page on pipe wrap repair options -
CLICK HERE

NON HAZMAT (CAN SHIP BY AIR AND/OR OUTSIDE THE USA)

2 inch by 60 inch wrap - $15

4 inch by 30 ft wrap - $52

--- ORDER ONLINE - section 6 misc - NOW! ---


OUR BEST SELLING PRODUCT IN THIS CATALOG SECTION!

TA 661:


A solvent free alternative to lacquer thinner or MEK for cleaning uncured epoxy off hands and tools. Soak your epoxy covered brushes, etc. in TA 661 overnight and they will be ready to reuse in the morning. Non evaporating (no need to cover your 'soaking pot'), reuse over and over. Works on uncured epoxy, but have had some reports of it success with 'just recently hard' epoxy too.

Also use as a flexibilizer in other epoxies - will also blister dried enamel and varnish overnight.

I also use it as the final step in cleaning brushes (enamels, latex, polyurethane, even epoxy). No matter how much a solvent (or water) rinse my paintbrushes after use, when I get back to them they are hard and stiff. Now I dip or soak the 'so-called' clean brush in the TA then shake or spin the TA out of the brush. The result is a non-stiff, non-sticky, non-oily brush ready for use on my next project.

It gets even better! I finally found a way to reuse brushes full of epoxy resin (instead of tossing the brush after every epoxy 'encounter'. When you are done with the epoxy - squeeze out as much of the epoxy from the brush as you can. Then rinse brush once or twice with sovlent. Now put the brush into a jar of TA 661. The TA will not evaporate so you don't need a lid on the jar. When you return at a later time pull out the brush - squeeze/spin the TA 661 out of the brush. You now have a clean soft brush ready for the next batch of epoxy!




NON HAZMAT (CAN SHIP BY AIR AND/OR OUTSIDE THE USA)

1gallon - $40

1 quart - $15

--- ORDER NOW via link to online storefront (section 6 - misc)----

CLICK HERE FOR DATASHEET & MSDS


Joint Link™:

A modern, sovlent free, self leveling (i.e. runny) rubbery polymer used to fill expansion joints in cement slabs. Super flex, super bond - a neat products with probably lots of other potential uses.


10 oz caulking tube - $11.50 (tan or gray)


CLICK HERE FOR DATASHEET & MSDS

--- ORDER NOW via link to online storefront (section 6 - misc)----


Fiberglass Tape/cloth:

USE THIS PRODUCT FOR PIPE WRAP REPAIRS OF PIPELINES AND TUBING - CLICK HERE

3 inch wide by 50 yard roll - $42

4 inch wide by 50 yard roll - $48

Above tapes often used for boat building (often stitch and glue construction) also for pipe repair/wrap projects.


12 inch wide by "how much do you want?" - sold by the running foot - $1 per foot. Great for "planking" your hull!

38 inch wide by "how much do you want?" - sold by the running yard - $4.90 per yard 6 oz cloth.


- note: better order this over the phone - the online shipping charge calculations go crazy when ordering lots of feet of this fiberglass (min shipping charges times, say, 25 for 25 feet of cloth)

--- ORDER NOW via link to online storefront (section 6 - misc)----



         



RELATED PRODUCT LINKS

* Ask Professor E. Poxy... (CLICK)

* Epoxy 101 - instant epoxy knowledge! (CLICK)

* Close-out or discontinued products, special prices (CLICK)

* more on epoxy adhesives - click here


CATALOG LINKS


COMPANY WIDE INDEX PAGE: www.epoxyproducts.com/map.html

INDUSTRIAL/COMMERCIAL HOME PAGE: www.epoxyproducts.com/main.html

INDUSTRIAL/COMMERCIAL CATALOG MAIN PAGE: www.epoxyproducts.com/products4u.html

INTERNATIONAL CATALOG: www.epoxyproducts.com/international.html

+++++++++++++++++++++++++++++++++++

SECTION A: epoxy paints

SECTON B: floor products

SECTION C: thickened epoxies - epoxy putties etc.

SECTION D: clear epoxies - clear coatings

SECTION E: non-epoxy paints coatings sealers

SECTION F: mix-in additives

SECTION G (this section): other products

SECTION H: surface preparation products

SECTION I: misc. accessories




CONTACT INFO - ORDERING - HOW TO REACH US - PHONE/EMAIL/FAX INFO


RETURN TO TOP OF PAGE

bad link to some other page? Please let us know!