HELP!

Water-Activated Pipe-Wrap

OFFERED BY PROGRESSIVE EPOXY POLYMERS, INC.

KEEP ONE OR TWO KITS ON BOARD/AT HOME TO FIX THOSE PLUMBING LEAKS AND/OR REINFORCE THOSE OLD RUBBER HOSES -- A CHEAP QUICK FIX!

Lots of companies sell water activated, polyurethane resin/fiberglass cloth pipe wrap kits. They have become mainstay repair products in industrial setting, among homeowners, and aboard pleasure and commercial craft. These fiberglass tape kits are used to repair plumbing pipes, PVC pipes, rubber and plastic tubing, fiberglass and other metallic piping. Handles temperatures from steam systems to engine mufflers. Resists fuels and hydraulic fluids. Handles pressures up to 600 psi (for higher pressures use our epoxies and fiberglass cloth). Our kits include a fast setting epoxy putty to plug the hole or leak prior to wrapping, as well as gloves to protect your hands. Keep a kit or two around for those sudden emergencies or to simply reinforce or strengthen all sorts of piping and tubing.

We stock two sizes: 2 inch by 60 inch and 4 inch by 30 ft wrap

Order Online - section 6 misc. - NOW!

WHAT IS YOUR PIPE REPAIR PRODUCT?

The product is a specially formulated fiberglass tape designed to repair water lines, sewer lines, fluid lines, pipelines, and anything else that supports fluids.

WHAT PRESSURES WILL IT HANDLE?

The product has been tested to support up to 300 PSI in pressurized lines and was able to prevent infiltration by maintaining a pure vacuum.

WHAT TYPE OF TOOLS ARE NEEDED TO APPLY IT?

No tools are required when applying the wrap to pipes as long as there is no corrosion, or coatings of any kind on the pipes when applied.

AT WHAT TEMPERATURES WILL IT WORK?

The wrap has been tested in many temperatures ranging from 800 degrees F to -60 degrees F. Because of the need for moisture (water) to start the chemical reaction the degrees of temperature only has bearing on the time frame for the complete curing process to occur.

CAN IT BE USED ON NATURAL GAS PIPES?

The wrap can be used to prevent gas leaks from corrosion of pipes caused from the elements, although anyone working with gas pipes should be certified in that area before attempting any repairs.

ON WHAT OTHER TYPES OF PIPES CAN IT BE USED?

The wrap can be applied to all types of pipes including PVC, cast iron, galvanized, and clay to name a few. The uniqueness of the product lies in its EPA approval for use on drinking water lines as well as being suitable for sewer, irrigation and chemical lines.

WHAT ARE THE CHANCES OF THE SECTION OF PIPE BREAKING AFTER APPLYING THE PRODUCT?

Not only does the product seal leaks in pipes, it also strengthens the vulnerable area of the damaged pipe causing it to be even stronger, in most cases, than it was before.

IS IT A PERMANENT REPAIR?

It can be considered a permanent repair in most industrial and home uses. It can also be used as an emergency fix until a maintenance crew has time to fit the damaged area into their maintenance schedule. Either way, the product enables the home owner, boat owner, or maintenance supervisor to make that decision.

----------------------------

HOW TO....

1 - LEAKING PIPE

2- ACTIVATE THE WRAP IN WATER

3- STOP LEAK WITH 'PLUG' AND

BEGIN TO WRAP PIPE

4 - WRAPPING THE PIPE

5 - TWISTING TO TIGHTEN WRAP

AROUND THE PIPE

6 - FINISHED RESULT!

Order Online - section 6 misc. NOW!

The alternative to the water activated pipe wrap is using fiberglass cloth and EPOXY. This is a stronger repair and more suitable for larger and/or more commercial applications. CLICK HERE for more info.

Knowledge is Power - We like informed consumers!

Learn the basics of epoxy at our educational EPOXY 101 page - Click Here.

Finally, email us back with your questions or comments before you buy - EMAIL HERE