HELP!

* PROGRESSIVE EPOXY POLYMERS, INC.

INDUSTRIAL/COMMERCIAL CATALOG SUB-PAGE *

LINKS TO OTHER CATALOG SECTIONS LOCATED AT BOTTOM OF PAGE

Goto our 1-line product/price summary page MARINE or INDUSTRIAL

Also visit our Primer on Priming page - Read about priming and surface treatments that can reduce the possibility of coating failure on concrete, steel or fiberglass - CLICK HERE

looking for an epoxy primer? CLICK HERE

barrier coat epoxy intro (including what can go wrong) CLICK HERE

need to apply epoxy underwater? CLICK HERE

SECTION A: Epoxy Paints

CORRO COAT FC 2100 --- OUR BEST SELLING PRODUCT IN THIS CATALOG SECTION!

This product has its own web page - CLICK HERE

This product contains superior Cycloaliphatic curing agents - CLICK HERE for more information.

FC 2100 forms an extremely hard, abrasion and wear resistant coating.

Contains Kevlar ™ pulp and feldspar ceramic for enhanced abrasion resistance.

Extreme high epoxy performance at an affordable price. A non-hazmat, 100% solids epoxy. Kevlar (tm) microfiber reinforced for chip resistance, loaded with feldspar/ceramic for extreme toughness and mechanical properties. This water tolerant epoxy will bond to wet or damp surfaces and can even be applied underwater. Odorless, so ideal for application in confined spaces. Paint pad or brush on at 15 mils without sagging (thinner if roller applied). Ideal for barrier coats. Coverage about 100 square feet per gallon with brush - about 140 square feet per gallon with roller (almost all solvent free epoxy paints have this sort of roller application coverage). Forms a very hard surface for corrosion protection. Outstanding wear/abrasion resistance, with application under adverse conditions.

Common industrial applications include; pits, sumps, cement or metal tanks, waste water, etc.

NOTE: ALL THESE SOLVENT FREE EPOXY PAINTS ARE THICKER THAN 'REGULAR' PAINTS, ESPECIALLY AT TEMPS UNDER 70 DEGREES - FIX IS A SMALL (WEE) BIT OF SOLVENT. FC2100 IS SLIGHTLY THICKER THAN WATERGARD 300, MOSTLY AT TEMPS UNDER 70 DEGREES F.

Note: because these 100% solids (solvent free), high end epoxy paints are all rather thick (especially in cool weather), we've had users report that they transfer the epoxy to the surface they're coating with a wide putty knife or drywall mud float and initially spread it out that way. They return with the roller or brush for final 'smoothing.' They liked this method much better than struggling with a roller only with the thick, sticky epoxy.

SOLVENTS: (MEK, ACETONE, XYLENE ETC. EPOXY VISCOSITY (AND POTLIFE) IS VERY TEMPERATURE DEPENDENT - IDEAL IS PROBABLY 75 DEGREES F).

This product comes in several 'flavors'

FC 2100 F - our standard version (formerly FC 2100 Flex) - 1:1 mix ratio, has a bit of flex for improved impact resistance. NON HAZMAT to ship (can be shipped by air and can be shipped overseas)

FC 2100 A - the original version (formerly FC 2100) - 2:1 mix ratio, slightly more rigid than the FC 2100 F which maximizes wear resistance.

The difference between 2100 A and 2100 F - Our original 2100 epoxy experienced some cracking when applied to a military railroad bridge. We assumed this was due to the sudden shock and 'impact' of the train 'hitting' the bridge. Our fix was to add more give to the product, resulting in 2100 F. The idea was that the new 2100 F would replace the original 2100 (A), but that didn't happen. Too many folks had become 2100 A 'regulars' and didn't want to 'upgrade', so we now offer both versions. The part A on both is the same, only the curing agent is slightly different. They are very interchangable. If I only needed three gallons of epoxy I would purchase two of the 1.5 gal 2100 A kits, rather than have to purchase two 2 gallon kits of the 2100 F. The more flexible version, 2100 F, is in theory better for surfaces that might bend or flex (some boat hulls, etc.) and is used as a stand alone coating, or on surfaces that must absorb shock or impact. The older 2100 A version would be better when used with fiberglass cloth, (boat repair, boat building etc.) where very hard and brittle is a good thing. Also hard and brittle surfaces handle wear and abrasion better than softer more flexible surfaces. Still the differences aren't that great so either product will work in any situation. FC 2100 A is non hazmat and can be shipped by air worldwide. FC 2100F cannot.

FC 2100 FAST - a fast version (actually used for application cold temperatures - say 40 - 55 F)

Now you can use FC 2100 FAST in air or water temperatures as low as 38 degrees F. Use the fast version in temps. of 35 to 65 degrees F, the 2100 F and 2100 A in temps over 60 degrees. This FAST version (like the high temp version) requires hazmat or ORM-D shipping (must be shipped via ground only - no extra shipping charges).

FC 2100 HT - a high service temp version 4:1 mix ratio - this one is hazmat to ship

High temperature version for use at temperatures 300 - 400 degrees F. now available too! (see our Epoxy temperature resistance site ) Will handle 300 plus degrees F dry temperatures after 150 degree post cure.

FC 2100 Novolac - a novolac version which ofers improved chemical resistance. 2:1 mix ratio. Limited availability.

This product help save a sinking yacht in Papua New Guinea - Click Here to learn more.

Advantages: same longish potlife as the Watergard 300 above; outstanding abrasion resistance, cycloaliphatic curing system, cold weather version available (ie. the FAST version) for use when temperatures are under 65 degrees; 1.5 gallon packaging

Note: one underwater repair trick is to soak sponge/foam rubber with this epoxy and then jam (caulk) underwater seams, cracks, holes, etc. with the epoxy soaked foam. It will swell to form a tight seal and become rock hard.


NON HAZMAT -- versions 2100 A, 2100 F and novolac versions only (CAN SHIP BY AIR AND/OR OUTSIDE THE USA)

FC 2100 F - 1/2 gal (64 oz) kit - $58 including shipping

FC 2100 F - 2 gallon kit FLEX - $180

FC 2100 F - 10 gallon kit FLEX $870

FC 2100 A - 1.5 gallon kit - $140

FC 2100 A - 48 oz. kit ( 0.375 gal) - $46 including shipping within the USA

FC 2100 FAST - 1.5 gallon kit - $147

FC 2100 FAST - 48 oz low temp (FAST) version - $52 including shipping

FC 2100 HT - 1.25 gallon high temp version - $160

FC 2100 HT - 40 oz. high temp version (0.31 gal)- $54 including shipping

FC 2100 Novolac - 48 oz. kit ( 0.375 gal) - $52 including shipping within the USA

FC 2100 Novolac - 15 gal unit $1400

--- ORDER ONLINE - section 2 epoxy paints - NOW! ---

Should you use a primer? Click Here

This product help save a sinking yacht in Papua New Guinea - Click Here to learn more.

This product is one of our UNDERWATER EPOXIES

CLASSIFICATION	HIGHEST QUALITY "A GRADE" MAINTENANCE AND BARRIER COATING --- TOP PERFORMANCE PREMIUM GRADE CYCLOALIPHATIC BASED CURING SYSTEM EPOXY ADDUCT FOR THE MOST DEMANDING APPLICATIONS INCLUDING CONSTANT IMMERSION
% VOC	SOLVENT FREE, 0% VOC, 100% SOLIDS
SHIPPING/EXPORTING	NON HAZMAT TO SHIP, CAN BE SHIPPED WORLDWIDE, CAN BE PRIVATE LABELED
VISCOSITY	THICK BUT BRUSHABLE, ROLLABLE
STND COLORS	GRAY
WET APPLICATION	CAN BE APPLIED UNDERWATER
MIX RATIO	1 TO 1 -- 2 TO 1 -- 4 TO 1 DEPENDING UPON VERSION BY VOLUME
STND PACKAGING	STANDARD PACKAGING IS 1.25 - 2 GALLON UNITS DEPENDING UPON WHICH VERSION OF PRODUCT. FOR OVERSEAS SALES AND CONTRACTORS SOLD IN COMBINATIONS OF 5 GALLON PAILS (10 OR 15 GALLON UNITS DEPENDING UPON MIX RATIO
MISC. INFO	CONTAINS KEVLAR (TM) AND FELDSPAR CERAMIC FOR TOUGHNESS. COMES IN SEVERAL VERSIONS (LOW APPLICATION TEMP VERSION, NOVOLAC VERSION, HIGH TEMP VERSION ETC.)
PRIMING	CONSIDERED SELF PRIMING BUT OFTEN APPLIED OVER SOLVENT BASED EPOXY PRIMER (ESP 155 or EPOXY PRIMER) TO IMPROVE BOND ON OLD, WEATHERED, POROUS, WEAK OR PATCHED SURFACES

CLICK HERE FOR VOC INFO & DATA SHEET & MSDS

NSP 120 (potable water version label) & Water Gard 300 (generic label - same product)

NSF Potable water approved (for specific applications CLICK HERE for details)

This epoxy has its own web page: CLICK HERE

This product contains superior Cycloaliphatic curing agents - CLICK HERE for more information.

A solvent free, non-hazmat (can be air shipped anywhere without restriction) epoxy adduct with NSF 61 potable water approval. Used for tanks, pits, secondary containment, pipelines, etc. Coverage is approx. 100 squ. feet per gallon (16 mils) although it can generally be applied thicker or thinner (on smooth vert surfaces figure a thinner 140 sf per gallon.. Std color: white and light blue (yellows much less than other white epoxies). Fast full cure time. Uses a cycloaliphatic curing agent.

This is a hard, rigid coating - very tough but if you think you need some 'flex' see our Corro Coat FC 2100F or CM 15 listed on this page.

NOTE: ALL THESE SOLVENT FREE EPOXY PAINTS ARE THICKER THAN 'REGULAR' PAINTS, ESPECIALLY AT TEMPS UNDER 70 DEGREES - FIX IS A SMALL (WEE) BIT OF SOLVENT. FC2100 IS SLIGHTLY THICKER THAN WATERGARD 300, MOSTLY AT TEMPS UNDER 70 DEGREES F

Note: because these 100% solids (solvent free), (this product is actually 97% solids) high end epoxy paints are all rather thick (especially in cool weather), we've had users report that they transfer the epoxy to the surface they're coating with a wide putty knife or drywall mud float and initially spread it out that way. They return with the roller or brush for final 'smoothing.' They liked this method much better than struggling with a roller only with the thick, sticky epoxy.

(SOLVENTS: MEK, ACETONE, XYLENE ETC. EPOXY VISCOSITY (AND POTLIFE) IS VERY TEMPERATURE DEPENDENT - IDEAL IS PROBABLY 75 - 80 DEGREES F Mighty thick at lower temps).

CLICK HERE TO GOTO OUR USERNOTES SECTION: FEEDBACK FROM FOLKS WHO HAVE USED THIS AND OUR OTHER EPOXIES. SOME REPORTS OF 'GRITTY' CRYSTALS IN THE PART A - HOW TO FIX....

NOTES FROM FOLKS USING IT ON BOAT HULLS (THEY TEND TO FIND IT THICK, ESPECIALLY AT COOLER TEMPS - Best temps to work at: 75 degrees plus...

NON HAZMAT (CAN SHIP BY AIR AND/OR OUTSIDE THE USA)

(potable water version)
3 gallon kit - $300

3 quart kit - $96

1.5 quart sample kit $64 (0.375 gal) including shipping within the USA

Non potable water approved version of NSP 120 is "Water Gard 300" CLICK HERE FOR VOC INFO & DATA SHEET & MSDS

3 gallon kit - $285

3 quart kit - $88

1.5 quart sample kit $60 including shipping within the USA

--- ORDER NOW via link to online storefront (section 2 - epoxy paint) ----

Should you use a primer? Click Here

This product has its own web page

industrial case studies

Case 1: sheet pile repair CLICK HERE

Case 2: power plant (Nuclear DBA testing) CLICK HERE

Case 3: interior plant wall coating  CLICK HERE

Case 4: Tyson Foods eviscerating wall coating CLICK HERE

Case 5: 200,000 gallon water tank CLICK HERE

Case 6: 40,000 gallon elevated potable water tank CLICK HERE

Case 7: 60,000 gallon potable water clear well CLICK HERE

Case 8: manhole coating project CLICK HERE

Case 9: lift station wet well CLICK HERE

Case 10: wastewater tank interior CLICK HERE

Case 11: concrete sewage main CLICK HERE

Case 12: waste treatment facility CLICK HERE

#

This product is one of our UNDERWATER EPOXIES

Power Plant application follow-up reports CLICK HERE

A nuclear grade epoxy - for more info CLICK HERE

CLICK HERE FOR VOC INFO & DATA SHEET & MSDS

--- ORDER NOW via link to online storefront (section 2 - epoxy paint) ----

Our formulator says this product has been used by the US Navy to paint achor chains.

CLASSIFICATION	HIGHEST QUALITY "A GRADE" MAINTENANCE AND BARRIER COATING --- TOP PERFORMANCE PREMIUM GRADE CYCLOALIPHATIC BASED CURING SYSTEM EPOXY ADDUCT FOR THE MOST DEMANDING APPLICATIONS INCLUDING CONSTANT IMMERSION
% VOC	SOLVENT FREE, 0% VOC, 100% SOLIDS
SHIPPING/EXPORTING	NON HAZMAT TO SHIP, CAN BE SHIPPED WORLDWIDE, CAN BE PRIVATE LABELED
VISCOSITY	THICK BUT BRUSHABLE, ROLLABLE
STND COLORS	WHITE, LIGHT BLUE
WET APPLICATION	CAN BE APPLIED UNDERWATER
MIX RATIO	2 TO 1 BY VOLUME
STND PACKAGING	STANDARD PACKAGING IS 3 GALLON UNITS. OTHER SIZES AVAILABLE
MISC. INFO	POTABLE WATER, NUCLEAR (DBA) AND 'FISH TANK' APPROVED UNDER OTHER LABEL NAME
PRIMING	CONSIDERED SELF PRIMING BUT OFTEN APPLIED OVER SOLVENT BASED EPOXY PRIMER (ESP 155 or EPOXY PRIMER) TO IMPROVE BOND ON OLD, WEATHERED, POROUS, WEAK OR PATCHED SURFACES

color matches (light blue):

Walmart Color Place stratosphere 92431
Benjamin Moore classic collection #780 - crisp morning air
Behr 520A-3 nevada sky
Glidden Bright and Lively wild blue yonder

Coal Tar Epoxy:

A modern solvent-free version of the old coal tar epoxies used on barges and buried pipelines. Great for exterior metal tanks, etc. Smells like asphalt and the uncured epoxy leaves tar like stains on things. Color is black. Inexpensive and with more 'flex' and 'elongation' (about 28% elongation and about 25% flex) than other modern epoxies. Paints on at about 160 square feet per gallon. 1:1 mix by volume. All in all, a nice black 'work' paint.

Being a 'thin' epoxy (with good coverage) our Coal Tar works best on rough surfaces such as cement, corroded/pitted metal, wood etc. On very smooth surfaces it tends to run and drip.

Our coal tar epoxy was used below the waterline and on many metal fittings on the 24 meter long, 3 masted pre-1840 Barkentine being build by App Applegate - Click Here for pictures, info, etc.

This product contains a blend of curing agents including Cycloaliphatic curing agents - CLICK HERE for more information.

Coal Tar (all coal tar epoxies are not the same! Learn more) web page - CLICK HERE

10 gallon kit - $550

2 gallon kit - $130

2 quart kit - $40

--- ORDER NOW via link to online storefront (section 2 - epoxy paint) ----

CLASSIFICATION	PROFESSIONAL QUALITY "B GRADE" MAINTENANCE COATING - THIS IS A HIGH QUALITY COAL TAR EPOXY
% VOC	0% VOC, 100% SOLIDS
SHIPPING/EXPORTING	HAZMAT - ORM-D TO SHIP. CANNOT BE SHIPPED OUTSIDE THE USA OR BY AIR
VISCOSITY	BRUSHABLE, ROLLABLE
STND COLORS	BLACK
WET APPLICATION	APPLIED TO DRY SURFACES
MIX RATIO	1 TO 1 BY VOLUME
STND PACKAGING	STANDARD PACKAGING IS 2 GALLON UNIT
MISC. INFO
PRIMING

CLICK HERE FOR VOC INFO & DATA SHEET & MSDS

CM 15 HOT WEATHER EPOXY ECONOMICAL EPOXY PAINT AND THICK FILM EPOXY MASTIC

USE AS A 'GENERAL PURPOSE' EPOXY PAINT AND/OR AS AN ADHESION ENHANCING MASTIC ON OLDER SURFACES UNDER SOLVENT FREE PREMIUM EPOXIES AND/OR URETHANES.

Read more about this product - CLICK HERE

CM 15 is a high solids (82%), economical, two-part epoxy designed as a general purpose epoxy mastic coating. Usually topcoated with a non epoxy paint. It contains proprietary resins, wetting agents and penetrants for surperior bonding. Use as an interior topcoat (will yellow outdoors in direct UV).. It's long potlife (3 hours at 75 degrees) and low viscosity make it suitable for spray application in the hottest of climates. Designed with a lot of internal flex, CM 15 can handle thermal expansion and contraction of large surfaces without failing. With a coverage rate of about 150-200 square feet per gallon, this is our most affordable epoxy coating. Often used as part of a three coat commercial system (click here for more information), but can be used alone. Colors: ivory, black

Because if its long potlife and solvents, this epoxy applies more like "regular" paint than do the other epoxies. Note that at 60 degrees temp, painted surfaces are still tacky after 20-24 hours, so recommend for use above 70 degrees and hotter (when other epoxies will set-up too quickly).

Can also be used as a warm weather (because it has a long potlife) cement floor coating. See our b_floor.html catalog page.

1 gallon kit - $76

--- ORDER NOW via link to online storefront (section 2 - epoxy paint) ----

CLASSIFICATION	PROFESSIONAL QUALITY "B GRADE" MAINTENANCE COATING AND/OR HIGH BUILD PRIMER WITH OUTSTANDING FLEXIBILITY
% VOC	18% VOC, 82% SOLIDS
SHIPPING/EXPORTING	HAZMAT - ORM-D TO SHIP. CANNOT BE SHIPPED OUTSIDE THE USA OR BY AIR
VISCOSITY	BRUSHABLE, ROLLABLE
STND COLORS	IVORY, BLACK
WET APPLICATION	APPLIED TO DRY SURFACES
MIX RATIO	4 TO 1 BY VOLUME
STND PACKAGING	STANDARD PACKAGING IS 1 GALLON UNIT
MISC. INFO	LONG HOT WEATHER POTLIFE, OUTSTANDING FLEX AND ENHANCED BONDING CHARACTERISTICS
PRIMING	USED AS A HIGH BUILD (6-10 MIL) PRIMER UNDER 100% SOLIDS EPOXIES AND OTHER URETHANES. ALSO USED AS A STAND ALONE GENERAL PURPOSE COATING

CLICK HERE FOR VOC INFO & DATA SHEET & MSDS

Crack Coat™ :SEAM SEALER AND BEDDING EPOXY

Designed as a crack or seam sealer/filler for basements and marine applications this flexible epoxy also makes an excellent waterproof, permanent bedding compound. The dark gray epoxy contains high density fillers that enter and block crack and void spaces. Formulated for use in cool (55 degrees or above), damp environments. Its unique viscosity is ideal for crack filling - thick to the point of barely brushable, yet just thick enough to possibly use with a putty knife - so you can work it into cracks easily and it will not flow or sag away. Add some of our EZ Thick thickener to turn it into a real putty if so desired. The non-brittle, flexible formulation is designed to handle movement, vibration, or expansion. Bonds to wet or water filled spaces. Packaged in user friendly 3 quart (3/4 gallon) units with an easy 2:1 mix ratio.

This product is unique enough that it has its own page - CLICK HERE.

THREE QUART KIT - $55

--- ORDER NOW via link to online storefront (section 2 - epoxy paint) ----

CLICK HERE FOR VOC INFO & DATA SHEET & MSDS

Cold Coat™: COLD WEATHER EPOXY PAINT

This product contains superior Cycloaliphatic curing agents (a blend - not 100%) - CLICK HERE for more information.

Cold Coat is a specially formulated, solvent free, cycloaphatic blend, cold weather epoxy for use in temperatures in the 40s and 50s (even works in the 30s). Note that all epoxies, especially the solvent free ones, get thicker at low temps. This one is thinner than most at low temps but still sort of sticky and honey-like when cold (even in hot weather epoxies are much diferent/thicker from enamels, etc). Use a short nap epoxy roller or stiff brush (maybe even some solvent thinning). Use as a marine barrier coat or for outside (or inside) projects. Color is dark green (which will mask UV yellowing and help absorb solar heat to aid in curing). Potlife (6 oz sample turning 'hard') is about 1 hour at 50-55 degrees F and about 30 minutes at 70 degrees. Bigger batches will have a shorter potlife. The epoxy is semi thick (but rollable) - Thin with solvent 10-20% (acetone or xylene or MEK for brush grade viscosity).

Use with our thickeners to make a cold weather putty - or use our Quick Fix 2100 epoxy paste.

2/7/07 COLD COAT - an epoxy paint formulated for cold weather application. We have about 12 kits in stock. This dark green epoxy works well, but is too thick for easy application at cold temperatures without the addition of some solvent. The next batch will be thinner but in the meanwhile we are selling the existing stock at a discount. Instead of the regular price of $110 for a 1.5 gal unit, the clearance price is $89 -- --- you will need to order by phone and not online to get this price

1.5 gal unit is $110

1. 5 quart unit - $48 including shipping

--- ORDER NOW via link to online storefront (section 2 - epoxy paint) ----

CLICK HERE FOR VOC INFO & DATA SHEET & MSDS (AVAILABLE SOON)

CLASSIFICATION	GOOD QUALITY, CYCLO-ALIPHATIC MAINTENANCE COATING FOR COLD WEATHER
% VOC	0% VOC, 100% SOLIDS
SHIPPING/EXPORTING	HAZMAT - ORM-D TO SHIP. CANNOT BE SHIPPED OUTSIDE THE USA OR BY AIR
VISCOSITY	BRUSHABLE, ROLLABLE
STND COLORS	DARK GREEN
WET APPLICATION	APPLIED TO DRY SURFACES
MIX RATIO	2 TO 1 BY VOLUME
STND PACKAGING	STANDARD PACKAGING IS 1.5 GALLON UNIT
MISC. INFO
PRIMING

For Max chemical or temp resistance - see our clear Novolac epoxy in section D of this catalog. Visit our Novolac info page - CLICK HERE

More about these epoxies - CLICK HERE

ON OVERSTOCKED ITEMS, DISCONTINUED ITEMS, OLDER

RELATED PRODUCT LINKS

* Ask Professor E. Poxy... (CLICK)

* Confused? More comparisons between these epoxy paints (CLICK)

Epoxy 101 - instant epoxy knowledge! (CLICK)

* Close-out or discontinued products, special prices (CLICK)

* chemistry of epoxies (novolac epoxies etc.)

* potlife page (some products only)

* working underwater on metal in salt water? CLICK HERE

* which is the right product for your application? CLICK HERE for more product comparison data

* rolling on a smooth surface - i.e. hull -CLICK HERE for roller comments (consider a paint pad)

* results of third-party (nuclear industry) industry testing of NSP 120

*

*

CATALOG LINKS

COMPANY WIDE INDEX PAGE: www.epoxyproducts.com/map.html

INDUSTRIAL/COMMERCIAL HOME PAGE: www.epoxyproducts.com/main.html

INDUSTRIAL/COMMERCIAL CATALOG MAIN PAGE: www.epoxyproducts.com/products4u.html

INTERNATIONAL CATALOG: www.epoxyproducts.com/international.html

+++++++++++++++++++++++++++++++++++

SECTION A (this section): epoxy paints

SECTION B: floor products

SECTION C: thickened epoxies - epoxy putties etc.

SECTION D: clear epoxies - clear coatings

SECTION E: non-epoxy paints coatings sealers

SECTION F: mix-in additives

SECTION G: other products

SECTION H: surface preparation products

SECTION I : misc. accessories

RETURN TO TOP OF PAGE

bad link to some other page? Please let us know!