water gard 300 ------------------ 3 gal unit $285 ---- 3 quart unit $88 ---- 1.5 quart unit $60*
A high end, solvent free epoxy paint available in blue or white. Our best selling barrier coat epoxy. This version has a little bit of flex to it. - 2 to 1 mix ratio. Also sold as NSP 120 epoxy. Found in the EPOXY PAINTS section of our online store front.
CM 15 ----------------------------------- 1 gal unit $86
A top quality solvent based epoxy paint with extremely long pot life and plenty of flex (unlike most brittle epoxy paints). Used as an epoxy paint/barrier coat. Found in the EPOXY PAINTS section of our online storefront.
Epoxy Primer ---------------------- see ESP 155 in section 1 above
crack coat™ ---------------------- 3 quart kit $55
A flexible epoxy gel that will cure in damp and cool conditions. Used as an epoxy glue, bedding compound and crack sealer. Found in the EPOXY PAINTS section of our online store front.
cold coat™ ------------------------------- 1.5 gal unit $110 --- 1.5 quart unit $48*
A dark green epoxy paint for use in cold weather. Found in the EPOXY PAINTS section of our online store front.
rough coat™ ------------------------------ 1 gal unit $90 --- 1/3 gal kit $42*
Tan colored, solvent based floor epoxy with non-slip grit mixed in. Found in the EPOXY PAINTS section of our online store
Novolac 155™----------------------------------- 1 gal unit $138 ---- 40 oz unit $62*
Enhanced properties of a novolac epoxy (better chem and temp resistance. - 4 to 1 mix ratio. Found in the EPOXY PAINTS section of our online store front.
NOTE: Coal Tar Epoxy is available and found in our industrial catalog.
Section 5 --- URETHANES AND NON-EPOXY COATINGS (CLICK ON LINK BELOW
FOR FULL PRODUCT DETAILS)
(http://www.epoxyproducts.com/5_urethane.html)
aluthane™ ----------------------------------------------------------------------- 1 quart $30 ---- 1 gal $85
An aluminum filled, moisture cured urethane. Amazing coating. Great primer and sealer and topcoat. Found in the NON - EPOXY COATINGS section of our online store front.
acrylic poly UV plus -------------------------------------------------- 1 gal $85 clear gloss -- 1 gal $90 clear satin
A clear 2 part acrylic polyurethane coating. Special due to the use of max. amounts of UV blocker in it. Will keep epoxies from yellowing. Found in the NON - EPOXY COATINGS section of our online store front.
solar guard™ --------------------------------------------------------------- 1 gal $65 --- 1 quart $25
A thin waterbased clear coat with UV blockers to keep epoxies from UV yellowing. Not as tough as the 2 part polyurethane listed above. Found in the NON - EPOXY COATINGS section of our online store front.
SU 94 fast reducer ----------------------------------------------------- 1 quart $15
A 'fast' solvent for use with two part polyurethanes. Found in the NON - EPOXY COATINGS section of our online store front.
SU 93 slow reducer --------------------------------------------------- 1 quart $15
A 'solvent' solvent for use with two part polyurethanes. Found in the NON - EPOXY COATINGS section of our online store front.
india spar varnish ------------------------------- 1 quart $20
A solvent based, traditional, hard-to-find classic varnish. Found in the NON - EPOXY COATINGS section of our online store front. Cannot be sold in California.
LPU marine™ -------------------------------------------------------------- 1.5 gal unit $165
Two part polyester polyurethane coatings. White only. Found in the NON - EPOXY COATINGS section of our online store front. Approved for use only on boats, cars, planes, etc. Cannot be sold in southern California.
one pak primer ------------------------------- 1 quart $16
A solvent based, traditional one part primer with corrosion inhibitors in the off white pigment. Brush, roll or spray on. Very good bonding to most surfaces. Found in the NON - EPOXY COATINGS section of our online store front.
Section 6 --- ANTI SLIP PRODUCTS (CLICK ON LINK BELOW FOR FULL PRODUCT DETAILS)
(http://www.epoxyproducts.com/6_nonskid.html)
ground walnut --------------------- 1 quart $5 (coarse, med, fine)
Ground walnut shell powder used with coatings as a non-slip additive. Comes in three grades. Found in the THICKENERS/FILLERS/ADDITIVES section of our online store front.
ground rubber --------------------- 1 quart $8
Off-white ground rubber flakes used with coatings as a non-slip additive. Found in the THICKENERS/FILLERS/ADDITIVES section of our online store front.
S-15 --------------------- 1 pint $10
A very fine white anti slip grit that becomes clear when added to thin solvent based coatings. Found in the THICKENERS/FILLERS section of our online store front.
deck plus™ ----------- 1 gal $65 --- 1 quart $20
water based rubber grit coating for decks. Apply with hopper gun or wall mud float. Found in the NON EPOXY COATINGS section of our online store front.
grit sampler ------------------------- $9*
Small amounts of our 3 grades of ground walnut, ground rubber, rough coat and deck plus hard sample. Found in the THICKENERS/FILLERS section of our online store front.
Section 7 --- OTHER REPAIR PRODUCTS (CLICK ON LINK BELOW FOR FULL PRODUCT DETAILS)
(http://www.epoxyproducts.com/7_repair.html)
fiberglass ----------------------------------------------- (3 in x 50 yards) $42 - 12 inch wide $1 per foot
Fiberglass cloth and 3 inch, 4 inch, 12 inch, and 38 inch widths. Found in the MISC. PRODUCTS section of our online store front.
pipe wrap ----------------------------------------------- 2 x 60 inch $15 ---- 4 in x 30 ft $52
Water activated fiberglass cloth kits for pipe repairs and reinforcing. Found in the MISC. PRODUCTS section of our online store front.
Capt Tolley's creeping crack cure ---- 2 oz $11.35 --- 8 oz $17.35
Polymer based sealer for hairline cracks and leaks. Found in the MISC. PRODUCTS section of our online store front.
Section 8 --- MISC. (CLICK ON LINK BELOW FOR FULL PRODUCT DETAILS)
(http://www.epoxyproducts.com/8_misc.html)
TA 661 ---------------------------------------------------------- 1 gal $40 ---- 1 quart $15
Non solvent cleaner of uncured epoxy, also adds flex to epoxy, and used on trowels as a troweling aid for trowel down epoxy finishes. Found in the MISC. PRODUCTS section of our online store front.
short nap roller ------------------------------------------- $6.50
Short nap epoxy/adhesive roller (stnd 9 inch) for use with sticky epoxies. Found in the MISC. PRODUCTS section of our online store front.
brushes 1 inch foam 24 count (limit 4) ---- $8.00
Found in the MISC. PRODUCTS section of our online store front.
brushes 2 inch bristle -------------------------------- $12 (for six brushes)
Found in the MISC. PRODUCTS section of our online store front.
tongue depressors ------------------------------------ $15.00
500 'senor' tongue depressors - approx. 6 inch by 5/8 inch. Found in the MISC. PRODUCTS section of our online store front.
epoxy pigment -------------------------------------------- $28.00
Use to tint or pigment clear epoxies. One quart unit will make 3 gallons of pigmented epoxy or many more gallons of 'slightly tinted' epoxy. Colors: tile red, black, white, dark brown, yellow. Found in the MISC. PRODUCTS section of our online store front.
wood veneer ---------------------------------------------- $12.00*
Five sheets of adhesive backed cherry veneer (about the color of fresh plywood). 7.75 by 11 inch. Grains goes 'short way.' Easy to stain any color. Found in the MISC. PRODUCTS section of our online store front.
wet film thickness gauge ------------------------ $4.50*
Insert this comb like plastic gauge into a wet coating and read the coating thickness in mils or microns.Found in the MISC. PRODUCTS section of our online store front.
INDUSTRIAL/COMMERCIAL/RESIDENTIAL HOMEPAGE - CLICK HERE. .
BOATING/MARINE HOMEPAGE - CLICK HERE. .
Many of the products listed above have online data and MSDS available - CLICK HERE
CONTACT INFO
- ORDERING - HOW TO REACH US - PHONE/EMAIL/FAX INFO
* denotes - price includes shipping within the lower 48 US states
 |
|
.. CLICK HERE TO GOOGLE SEARCH OUR ENTIRE WEB SITE FOR KEY TERMS/WORDS .. |