One Line Industrial Summary Page
FYI: catalog pages are blue (marine) or yellow (home/indust), info pages are green, product pages are purple, core pages are gray
DIY/INDUST
NAVIGATION
BAR
Main Home Page ====>
*
Res/Ind Home Page ====>
*
Res/Ind Catalog Contents Page ====>
*
Res/Ind Online Catalog Page ====>
*
Contact Page /Link to Storefront/Ordering
*
This is a Catalog Page
*
HELP Page
Progressive Epoxy Polymers, Inc.
..
..
..
..
..
.YOU ARE HERE.
NOTICE: Legal notices, Terms of Service, warranty information, disclaimers, health warnings, etc. are required reading before using web site, ordering and/or using Products. Any such use and/or ordering, online or by telephone, shall constitute acceptance and knowledge of all such terms.
CLICK HERE (www.epoxyproducts.com/legal.html) to access these terms.
PROGRESSIVE EPOXY POLYMERS, INC.
ONE LINE PRODUCT LISTING
INDUSTRIAL Catalog (Epoxy Resins - Floor Epoxy - Epoxy Fillers - Supplies)
|
QUICK PURCHASE THIS ITEM NOW Several high volume, core Favorite Products have a Quick Purchase Option. This option allows you to skip going to our Contact Page and our Storefront Primary Page and takes you directly to the storefront category section where this product is located for purchase. All legal terms, conditions and disclaimers still apply. To access this Quick Purchase Option, click on the product name. --- Basic No Blush --- Bio Clear 810 --- Wet Dry 700 --- Aluthane --- Fumed Silica (thickener and fishing aid) --- |
Section A --- EPOXY PAINTS (CLICK ON LINK BELOW FOR FULL PRODUCT DETAILS)
(http://www.epoxyproducts.com/a_epoxypaint.html)
The gray colored Kevlar (tm) reinforced Corro Coat FC 2100 epoxies all can be applied underwater. Often used as a barrier coat, tank, pit, or containment coating. A high end epoxy paint. Found in the EPOXY PAINTS section of our online store front.
FC 2100 A ----------------------------- 1.5 gal unit $156 ---- 48 oz unit $52* (15 gal unit $1450)
The original version. - 2 to 1 mix ratio.
FC 2100 fast ----------------------- 1.5 gal unit $165 ---- 48 oz unit $55*
This version is for use in cold weather/water. - 2 to 1 mix ratio.
FC 2100 high temp------------- 1.25 gal unit $160 ---- 40 oz unit $54*
This version will handle temperatures up to about 300 F. - 4 to 1 mix ratio.
Novolac 155™----------------------------------- 1 gal unit $138 ---- 40 oz unit $62*
Enhanced properties of a novolac epoxy (better chem and temp resistance. - 4 to 1 mix ratio. Found in the EPOXY PAINTS section of our online store front.
Water Gard 300™ ----------------------------- 3 gal unit $312 ---- 3 quart unit $92 ---- 1.5 quart unit $63*
A high end, solvent free epoxy paint available in blue or white. This version has a little bit of flex to it. - 2 to 1 mix ratio. Found in the EPOXY PAINTS section of our online store front.
NSP 120 ------------------------------------------ 3 gal unit $335 ---- 3 quart unit $100 ---- 1.5 quart unit $67*
A potable water version of the Water Gard 300 solvent free epoxy paint available in blue or white. This version has a little bit of flex to it. - 2 to 1 mix ratio. Found in the EPOXY PAINTS section of our online store front.
coal tar ------------------------------------------- 2 gal unit $151 ---- 2 quart unit $51 ---- (10 gal unit $700)
A very high quality, solvent free, black coal tar epoxy. This version has a little bit of flex to it. - 1 to 1 mix ratio. Found in the EPOXY PAINTS section of our online store front.
CM 15 --------------------------------------------- 1 gal unit $88
A top quality solvent based epoxy paint with extremely long pot life and plenty of flex (unlike most brittle epoxy paints). Used as an epoxy paint/barrier coat. Found in the EPOXY PAINTS section of our online storefront.
water prime™ ---------------------- 40 oz. unit $28 --- 1 gal unit $80
A gray or clear, waterbased epoxy primer and sealer. Applies much like latex paint, easy water cleanup. Found in the EPOXY PAINTS section of our online store front.
crack coat™ --------------------------------- 3 quart unit $72
A flexible epoxy gel that will cure in damp and cool conditions. Used for sealing basement type cracks and as an epoxy adhesive. Found in the EPOXY PAINTS section of our online store front.
Section B --- FLOOR PRODUCTS (CLICK ON LINK BELOW FOR FULL PRODUCT DETAILS)
(http://www.epoxyproducts.com/b_floor.html)
water bond™ ------------------------------- 1 gal unit $79
Our line of waterbased floor epoxies. We stock med. gray
DIY Flor-Poxy™ kit --------------------- 1 unit $175*
A complete garage floor epoxy kit. Six colors and six different chip blends. Free shipping
industrial floor ---------------------------- 1.5 gal unit $105 ---- 1.5 quart unit $50* ---- (15 gal unit $975)
Solvent free floor epoxy in beige or light gray. Found in the EPOXY PAINTS section of our online store front.
rough coat™ ------------------------------ 1 gal unit $90 --- 8 oz test unit $15
Tan colored, solvent based floor epoxy with non-slip grit mixed in. Texture suitable for bare feet.
epoxy mortar patch™ --------------- 1.5 gal unit $78
Mix sand with this fast setting epoxy to patch cement floors, runways, potholes, etc. Found in the EPOXIES section of our online store front.
bio vee seal™ ------------------------------- 5 gal $230 ---- 1 gal $50 ---- 1 quart $26*
A concrete sealer and moisture reducer that works by seeping into concrete and 'clogging' up the pore spaces. Leaves nothing on the surface. Found in the NON - EPOXY COATINGS section of our online store front. Not sold from Dec 1 - March 15 due to risk of freezing.
bio vee gloss™ ----------------------------- 1 gal $55
A water-based, clear, acrylic concrete sealer and topcoat. Found in the NON - EPOXY COATINGS section of our online store front.
ground walnut shell ----------------- 1 quart $6 (coarse, med, fine)
Ground walnut shell powder used with coatings as a non-slip additive. Comes in three grades. Found in the THICKENERS/FILLERS/ADDITIVES section of our online store front.
ground rubber grit -------------------- 1 quart $9
Off-white ground rubber flakes used with coatings as a non-slip additive. Found in the THICKENERS/FILLERS/ADDITIVES section of our online store front.
colored chips --------------------------- 10 lb $50 - 55 lb $225
Colored paint chips for use in floor epoxies. Drop shipped from the factory. Custom blended you provide the color numbers and percentages of each color (www.epoxyproducts.com/chips4u.html). Cannot be purchased on-line, pls call in your order.
S-15 ------------------------------------- 1 pint $10
A very fine white anti slip grit that becomes clear when added to thin solvent based coatings. Found in the THICKENERS/FILLERS section of our online store front.
(http://www.epoxyproducts.com/c_thickened.html)
wet/dry 700™ ---------------------------- 1 gal unit $100 ---- 1 quart (2 pint) $52* (10 gal $950)
Our premium, kevlar (tm) reinforced epoxy paste - can be applied underwater. Used for gluing and repairs. Found in the EPOXY THICK/PUTTY section of our online store front.
epoxy cream™ ---------------------------- 1.5 gal unit $115 ---- 1.5 quart unit $52* (10 gal $830)
A cream epoxy gel/putty with exceptionally long pot life. Creamy and it slides nicely off a putty knife. Found in the EPOXY THICK/PUTTY section of our online store front.
splash zone A-788 ----------------- 2 gal unit $225 --- 4 oz. unit $25*
This is the original A - 788 Splash Zone underwater epoxy putty, now getting harder and harder to find.... Found in the EPOXY THICK/PUTTY section of our online store front.
QR 2400™ ------------------------- 1 gal unit $130 ---- 1 quart unit $52* ---- (10 gal unit $1125)
A normal to slow setting dark brown epoxy paste that cures to a rubbery material. Can be applied underwater. Used for gluing and repairs. Found in the EPOXY THICK/PUTTY section of our online store front.
quick fix 2300™ ---------------------- 1 gal unit$130 --- 1 quart (2 pint) unit $52* (10 gal unit $1125)
A 'faster' version of the Wet Dry 700 epoxy listed above. Use in cold weather/water or for a faster setting epoxy. Found in the EPOXY THICK/PUTTY section of our online store front.
(http://www.epoxyproducts.com/d_clear.html)
low V™ --------------------------- 1.5 gal unit $105 ---- 48 oz unit $52* ---- (15 gal unit $975)
A clear,watery epoxy, used for all sorts of things, like sealing wood, cement etc. Mixed with solvent to form a penetrating epoxy and/or epoxy primer. Found in the EPOXIES section of our online store front.
low v floor™ ----------------- 1.5 gal unit $105
Very similar to the low V epoxy but with slower yellowing (and a bit thicker). Used primarily as the 'chip layer' on epoxy floors.
no blush™ ------------------- 3 quart unit $55 ($62 with summer or winter curing agent) ---- 1.5 gal unit $93 ($100 with summer or winter curing agent)
---- 15 gal unit $900 --- 30 gal unit $1695 (12 oz sampler kit - $18.50)
Best selling clear epoxy, also used for sealing pebble stone walkways. Found in the EPOXIES section of our online store front. Available with fast, slow or 'normal' curing agent.
premium no blush™---- 2.5 gal unit $225 ---- 40 oz unit $50* ---80 oz unit $80 (25 gal unit $1825)
A slightly more weather resistant, amber epoxy, also this epoxy is non hazmat to ship so can be sent by air or outside the USA. Found in the EPOXIES section of our online store front.
ESP 155™ -------------------- 1/2 gal unit $48
A cycloaliphatic (a very good thing!) solvent based/thinned clear epoxy for use as a primer, penetrating epoxy (on dry surfaces) or bond enhancer for other kinds of topcoats. Found in the EPOXIES section of our online store front.
bio-clear 810™ ----------- 48 oz unit $50* ----- 1.5 gal unit $105 ----- 3 gal $190
A clear, watery epoxy used for pour-on table and bar tops. Cannot be brushed on. Found in the EPOXIES section of our online store front.
Section E --- NON EPOXIES (CLICK ON LINK BELOW FOR FULL PRODUCT DETAILS)
(http://www.epoxyproducts.com/e_nonepoxy.html)
aluthane™ ----------------------------------------------------------------- 1 gal $92 ---- 1 quart $32
An aluminum filled, moisture cured urethane. Amazing coating. Great primer and sealer and topcoat. Found in the NON - EPOXY COATINGS section of our online store front.
acrylic poly UV Plus (clear) ------------------------------------ 1 gal $110 clear gloss --- $130 clear satin
A clear 2 part acrylic polyurethane coating. Special due to the use of max. amounts of UV blocker in it. Will keep epoxies from yellowing. Found in the NON - EPOXY COATINGS section of our online store front.
polyester poly (clear) ------------------------------------ 1 gal $130 clear gloss
A clear 2 part polyester polyurethane coating. Best LPU clear coating available. Found in the NON - EPOXY COATINGS section of our online store front.
UV Blocker - CRAB COAT ------------------------------------ 1 pint $28
A clear 1 part water borne acrylic with UV blockers. Will keep epoxies and plastics from yellowing. Found in the NON - EPOXY COATINGS section of our online store front.
Capt Tolley's creeping crack cure -------------------- 2 oz $11.35 --- 8 oz $17.35
Polymer based sealer for hairline cracks and leaks. Found in the MISC. PRODUCTS section of our online store front.
SU 94 fast reducer --------------------------------------------- 1 quart $18.50
A 'fast' solvent for use with two part polyurethanes. Found in the NON - EPOXY COATINGS section of our online store front.
SU 93 slow reducer -------------------------------------------- 1 quart $18.50
A 'solvent' solvent for use with two part polyurethanes. Found in the NON - EPOXY COATINGS section of our online store front.
india spar varnish -------------------------------------------- 1 quart $22
Solvent based, hard to find, traditional old time varnish. NON - EPOXY COATINGS section of our online store front. Not for sale in California.
(http://www.epoxyproducts.com/f_mixin.html)
fumed silica ------------------------ 1 quart $6.00
Most common thickener - weights almost nothing - so light it is a 'pain' to mix into the epoxies. One brand of fumed silica is known as Cab-o-Sil ®. Found in the FILLERS section of our online store front.
poly fiber ----------------------------- 1 quart $6.00
Reinforcing poly fibers often added to epoxy for greater internal strength. Found in the THICKENERS/FILLERS section of our online store front.
microspheres --------------------- 1 quart 0.6 sg $6.00; 1 quart 0.28 sg $7.00
Very fine and light glass spheres added to epoxies to thicken and for easier sanding. May work like mini-ball bearings and cause epoxy to slump if used by itself. Found in the THICKENERS/FILLERS section of our online store front.
graphite powder ---------------- 1 lb (almost 1 quart) $20
Graphite is added to epoxy to reduce friction (like in a centerboard truck) and/or for the midnight gray color it gives to the epoxy. Found in the THICKENERS/FILLERS section of our online store front.
teflon (tm) --------------------------- 1/2 lb (about 1 pint) $35
Less messy than graphite, a white friction reducer added to epoxy. Helps keep the epoxy surfaces slick. Hard to paint over. Found in the THICKENERS/FILLERS section of our online store front.
copper powder ------------------ 1 lb (about 1 quart) $22.50
Very fine copper powder dust. Often mixed into clear epoxies and other coatings. Found in the THICKENERS/FILLERS section of our online store front.
wood flour -------------------------- 1 quart $6.00
Easy mix-in epoxy thickener, peanut butter color. Found in the THICKENERS/FILLERS section of our online store front.
EZ thick ------------------------------ 1 quart $6.00
Easy mix-in epoxy thickener. Found in the THICKENERS/FILLERS section of our online store front.
rock flour --------------------------- 1 quart $6.00
Rock dust for making 'rock hard' epoxy. Found in the THICKENERS/FILLERS section of our online store front.
MIO (micaceous iron oxide) --------------------------- 1 quart/4 pounds $18
Anti-corrosive additive for epoxies and paints. Found in the THICKENERS/FILLERS section of our online store front.
(http://www.epoxyproducts.com/g_otherprod.html)
pipe wrap -------------------------- 2 inch by 60 inch $15; 4 inch by 30 ft $52
Water activated fiberglass cloth kits for pipe repairs and reinforcing. Found in the MISC. PRODUCTS section of our online store front.
TA 661 ------------------------------ 1 gal $48 ---- 1 quart $18
Non solvent cleaner of uncured epoxy, also adds flex to epoxy, and used on trowels as a troweling aid for trowel down epoxy finishes. Found in the MISC. PRODUCTS section of our online store front.
fiberglass cloth --------------- 3 inch by 50 yards $48 - 4 inch by 50 yards $53 -
Fiberglass cloth 3 inch, 4 inch, Found in the MISC. PRODUCTS section of our online store front.
tile preparer -------------------------------------------- 1 quart $18
Use to prepare glazed tiles for coating. Found in the MISC. PRODUCTS section of our online store front.
(http://www.epoxyproducts.com/h_prep.html)
(http://www.epoxyproducts.com/i_misc.html)
short nap roller -------------------------------------------- $6.50 per 9 inch roller. $10.00 for four 3 inch rollers.
Short nap epoxy/adhesive roller (stnd 9 inch or 3 inch) for use with sticky epoxies. Found in the MISC. PRODUCTS section of our online store front.
roller cage for 3 inch rollers ------------------------$4.00
Mount the 3 inch rollers onto this 3 inch roller holder. Found in the MISC. PRODUCTS section of our online store front.
slotted 'pebble stone' roller ------------------------$6.50
Thick foam roller with many vertical slits (stnd 9 inch) for use with epoxy recoating of pebble stone walkways (or other very rough surfaces). Found in the MISC. PRODUCTS section of our online store front.
brushes 1 inch foam 24 count (limit 4) ---- $10.00
Found in the MISC. PRODUCTS section of our online store front.
pumps for 1.5 gal Basic No Blush and Low V epoxy ---- $11.50 (two pumps)
Found with the Basic and Low V epoxy in the in the EPOXIES section of our online store front.
brushes - epoxy 'stab' brushes 3 inch with short 3/4 inch long bristles ----- $12 (for six brushes)
Found in the MISC. PRODUCTS section of our online store front.
brushes 2 inch bristle -------------------------------- $12 (for six brushes)
Found in the MISC. PRODUCTS section of our online store front.
tongue depressors ------------------------------------ $15.00
500 'senior tongue depressors - approx. 6 inch by 5/8 inch. Found in the MISC. PRODUCTS section of our online store front.
epoxy pigment -------------------------------------------- $28.00
Use to tint or pigment clear epoxies. One quart unit will make 3 gallons of pigmented epoxy or many more gallons of 'slightly tinted' epoxy. Colors: tile red, white, black, dark brown, yellow. Found in the MISC. PRODUCTS section of our online store front.
Warm Tone Dye (Crysta Lac) ------------------------------------------------------- 4 oz $14.95
Add to clear solvent based coatings, resins and varnish to add or enhance the 'warm' amber tint found in traditional varnishes and topcoats. Found in the NON EPOXY PRODUCTS section of our online store front.
wet film thickness gauge ------------------------ $4.50*
Insert this comb like plastic gauge into a wet coating and read the coating thickness in mils or microns.Found in the MISC. PRODUCTS section of our online store front.
pint cans ---------------------------------------------------- $10.00
Six metal pint cans with lids. Found in the MISC. PRODUCTS section of our online store front.
wood veneer -------------------------------------------- $12.00*
Five sheets of adhesive backed cherry veneer (about the color of fresh plywood). 7.75 by 11 inch. Grains goes 'short way.' Easy to stain any color. Found in the MISC. PRODUCTS section of our online store front.
* denotes - price includes shipping within the lower
48 US states
 |
|
.. CLICK HERE TO GOOGLE SEARCH OUR ENTIRE WEB SITE FOR KEY TERMS/WORDS .. |
