.

Water Gard 300 (tm) & NSP 120 Epoxy Paint Page

FYI: catalog pages are blue (marine) or yellow (home/induct), info pages are green, product pages are purple, core pages are gray

Using this site means you accept its terms and conditions of use

NSP 120 (Water Gard 300)

ANSI/NSF Standard 61 Zero VOC

Potable Water Approved

Epoxy Paint (Adduct)

(DBA nuclear approval too!)

Your Host and Tour Guide:

Paul Oman, MS, MBA - Progressive Epoxy Polymers, Inc. (floor epoxies, marine epoxies, underwater epoxies, repair epoxies)

Member: NACE (National Assoc. of Corrosion Engineers), SSPC (Soc. of Protective Coatings)

"Professionals helping Professionals"

A solvent free, non-hazmat (can be air shipped anywhere without restriction) epoxy adduct with NSF 61 potable water and DBA nuclear approval. Used for tanks, pits, secondary containment, pipelines, etc. Coverage is approx. 100 squ. feet per gallon (16 mils) although it can generally be applied thicker or thinner (about 150 square feet by roller). Std color: white (yellows much less than other white epoxies) or light (sky) blue. 300 degree F dry service temperature. Fast full cure time. Cures in cool temperatures. Apply by roller, airless sprayer or heated plural.

Our NSP 120 epoxy does have NSF potable water approval. However, such approval is specific to certain applications. The approval for NSP 120 is on water storage tanks greater than 1000 gallons and on pipelines greater than 16 inches in diameter. Application method, coating thickness, use of approved solvents/thinners are all specified. Available colors: light blue, white.

Click here for link to Potable Water epoxies explained web page - Potable Water.

This product contains superior Cycloaliphatic curing agents - CLICK HERE for more information.

Nuclear (DBA) grade approved! - for more info CLICK HERE

Our formulator says this product has been used by the US Navy to paint anchor chains (color was black)

Adduct epoxies are two part epoxies but the curing agent actually contains a bit of the epoxy resin. In affect, the 'mixture' has started to cure even before the two parts are mixed. They perform pretty much like other epoxies, but, at least in our experience, have better color stability and will cure at slightly cooler temperatures. Also, at least with our NSP 120, time (cure time) to 'back in service' is much faster than with 'regular' epoxies.

CLASSIFICATION	HIGHEST QUALITY "A GRADE" MAINTENANCE AND BARRIER COATING --- TOP PERFORMANCE PREMIUM GRADE CYCLOALIPHATIC BASED CURING SYSTEM EPOXY ADDUCT FOR THE MOST DEMANDING APPLICATIONS INCLUDING CONSTANT IMMERSION
% VOC	SOLVENT FREE, 0% VOC, 100% SOLIDS
SHIPPING/EXPORTING	NON HAZMAT TO SHIP, CAN BE SHIPPED WORLDWIDE, CAN BE PRIVATE LABELED
VISCOSITY	THICK BUT BRUSHABLE, ROLLABLE
STND COLORS	WHITE, LIGHT BLUE
WET APPLICATION	CAN BE APPLIED UNDERWATER
MIX RATIO	2 TO 1 BY VOLUME
STND PACKAGING	STANDARD PACKAGING IS 3 GALLON UNITS. OTHER SIZES AVAILABLE
MISC. INFO	POTABLE WATER, NUCLEAR (DBA) AND 'FISH TANK' APPROVED UNDER OTHER LABEL NAME
PRIMING	CONSIDERED SELF PRIMING BUT OFTEN APPLIED OVER SOLVENT BASED EPOXY PRIMER (ESP 155 or EPOXY PRIMER) TO IMPROVE BOND ON OLD, WEATHERED, POROUS, WEAK OR PATCHED SURFACES

Can be applied underwater - with some site specific exceptions - See User notes and Charge pages. Because of these issues which are completely outside of our control, user accepts full responsibility for all risks of underwater application of these epoxies. Not NSF 61 approved if applied underwater.

Quick Purchase this product at our simplified www.epoxyUSA.com site

or use our

Direct Link to our larger EpoxyProducts.com Storefront for Quick Purchase

CONTACT INFO - ORDERING - HOW TO REACH US - PHONE/EMAIL/FAX INFO

LINKS:

GOTO NSP 120 industrial/commercial case studies - CLICK HERE

GOTO NSP 120 in our industrial catalog - CLICK HERE

GOTO NSP 120 case - follow up reports in hydro - nuclear - chemical plants - CLICK HERE

Chemistry of Epoxies (what's an ADDUCT?) page - CLICK HERE

www.epoxyproducts.com

Frog Pond Hollow

\