HELP!

HYDRO - NUCLEAR - CHEMICAL PLANT EPOXY COATINGS

PROGRESSIVE EPOXY POLYMER, INC.

EPOXY PRODUCTS

Your Host and Tour Guide:

Paul Oman, MS, MBA - Progressive Epoxy Polymers, Inc.

Member: NACE (National Assoc. of Corrosion Engineers), SSPC (Soc. of Protective Coatings)

"Professionals helping Professionals"

More on nuclear testing of epoxies (especially DPA (ASTM 3911) tested NSP 120) - CLICK HERE

The NSP 120 website - CLICK HERE

NEW PRODUCT:

The Corro Coat FC 2100 family of epoxies:

(go direct to our industrial products catalog) - click here

CLICK HERE FOR DATA SHEET & MSDS

Corro Coat FC 2100 is another similar epoxy available from Progressive Epoxy Polymers, Inc. It was introduced in 2001, long after the third party testing described above. We believe this product would have faired extremely well in the above testing and offer it here as an alternative to the above outstanding maintenance coatings.

FC 2100 is approximately the same thickness as NSP 120 with similar coverage. Can be applied underwater. Color light gray (other colors available in 15 gallon units). Thicker gel, high temperature, low temp (cures underwater or on dry surfaces down to 35 degrees F) and novolac versions also available. Standard product is non-hazmat to ship. Available for private labeling and export outside the USA. Contains Kevlar (tm) and ceramics. Smooth finish. Priced around $80 per gallon. Time for 6 oz sample at 70 degrees to cure to a rubbery/semi-solid mass: 85 minutes MORE ON FC 2100 - Click here. See Potlife page.

Knowledge is Power - We like informed consumers!

Learn the basics of epoxy at our educational EPOXY 101 page - Click Here.

Finally, email us back with your questions or comments before you buy - EMAIL HERE

###