PROGRESSIVE
EPOXY POLYMERS, INC.
Apply Underwater Epoxy Coatings
(PAGE 2)
This is the more detailed PAGE 2
return to Homepage
**
EMAIL / ph 603.435.7199 EST / BUY ONLINE **Member: NACE (National Assoc. of Corrosion Engineers), SSPC (Soc. of Protective Coatings)
"Professionals helping Homeowners, Boat Owners and Professionals since 1994"
THIS SECTION (detailed page two) : Special, apply underwater epoxies (pools - boats - reefs - etc.)
APPLY 2-PART UNDERWATER EPOXY PRODUCTS
Pool Repair, Fountain Repair, Boat Repair
Let's talk about underwater painting and repair (603 - 435 - 7199 or EMAIL)
This product is featured on the GreatThings4u.com website
Jeff (1/2013)
I cannot believe how incredible this Wet Dry 700 is. It's revolutionary. The original repair to my storm shelter would have lasted years if the shelter would just stop shifting around in the ground. DON'T STOP SELLING THIS STUFF.
(10/2013) Comments: Returning - Underwater boat repair
My third or fourth order and am still quite pleased with the result. It has many uses above and below the water line.
Wet Dry 700 is the only Epoxy Putty reinforced with Kevlar (tm) microfibers and feldspar ceramic for an incredible hard and tough product. This is a hard working epoxy paste (about as thick as wall mud or cake icing).
COMMON APPLICATIONS: Patching holes voids and leaks, underwater repairs (pools, boats, tanks), rot repair, gluing, pipe wraps, vertical/overhead fiberglass repairs, marine blister repair
Can be applied Underwater too! (it has saved lots of boats, leaking swimming pools and sinking floating homes) - Nothing else like it in the market. Lots of folks buy it for a specific project and then come back to purchase more just to have around and handy.
We have a range of Use Underwater epoxies. Call to find the right product for your needs. Largest selection of underwater epoxies on the internet!
|
|
Paul, I'm not the kind of person to give feedback on products or services but I must comment on the Water Gard 300 product. I purchased a home 4 years ago with a fiberglass pool and 2 years ago it started to significantly chip. Long story short, after significant analysis from multiple experts, it turns out that the pool had ruptured and was repaired. Unfortunately the repair person applied the fiberglass topcoat incorrectly and it is all coming off. Luckily the pool is structurally sound, just very ugly to look at. Estimates to fix it range from $8,000 to $25,000 and no one would guarantee that the entire pool would not collapse after draining the water which would require an entire replacement.
|
|
|
|
After a year
of searching, and countless attempts at other solutions, I came
across your product. This product is amazing! I still can't believe
it's even possible to apply a paint (sorry epoxy) underwater. I used
a 14 foot extension pole with a roller to apply the paint/epoxy. The
most time consuming part was mixing parts A and B together. I
purchased the 3 gallon size but since I was working alone I mixed
small batches since the pot life was short. For roughly $350 my pool
looks brand new! I can't thank you enough. I've attached some before
and after pictures.
Thanks again, David WATER GARD 300 EPOXY - COMMON APPLICATIONS: marine barrier coat, underwater swimming pool repair, commercial grade blue/white epoxy paint, fish tanks, pits, manholes, water treatment facilities |
|
Swimming Pool Chips - Stains and Cracks
Pool chips, stains and cracks can easily and cheaply be repaired with our Water Gard 300 Underwater epoxy paint (colors white or light blue). If you have a chip or stain or crack call us immediately at 603 435 7199. If you leave the damaged area alone, it will only get worse, leading to a very $$$$ contractor repair and the draining and refilling of your pool.
8/14 -- My name is T..R... and I live in Las Vegas, Nev. I have a beautiful custom pool and I noticed a small area on the side wall of my pool. I took a wire brush and tried to remove the dark colored spot. Unfortunately I rubbed too hard and made it worse, much worse.
I contacted 10 different pool companies and each of them informed me that I would need to drain the pool to repair the spot that was getting larger by the day. Draining a pool with 28,000 gallons during the summer is bad enough, but fixing the plaster that had been rubbed down to the Gunnite is very expensive. I needed a pauloman555@yahoo.com fix and there did not seem to be one! Well, I was wrong.
I discovered a man named Paul Oman at epoxyproducts.com on the internet when I searched for (plaster underwater repair) and to my amazement he told me about an epoxy that you mix in a ratio of 2 to 1 (Water Gard 300 - available in white or light blue).
It is human nature to be skeptical. Wow, this product is incredible! It repaired the spot perfectly for less than $100 and not the thousands that I would certainly have had to spend to repair the side of my pool.
Once last thing, Paul sent me the white at my request. I mixed a light blue paint from a hobby store and my pool looks great. This product is perfect and it is for real. Do yourself a favor and don’t listen to the pool guys, they want your business and that adds up to big bucks!
Thanks again Paul for helping me solve this problem. --- T..R..
|
Hi Paul. This is Dave from San Angelo, Tx. As I told you before, the underwater applied epoxy worked great. I recommend you send your product info to all pool companies and pool supply retailers or if you can find out who has fiberglass pools and send them info if they ever need it. Thanks 6/16 |
"Thanks much for the newsletter. The epoxy products I bought performed perfectly by bonding to the FRP pool.
What a unique and pleasant experience it was working with you and your company." -- Lance (10/14)
|
Dear Paul,
All I can say is thank you.... I have a small fiberglass in-ground pool with visible bare spots. With the cost of repainting (estimates of $5000) and risk of the pool popping out of the ground if it was emptied to be repainted I looked for alternatives and found you. Used the Water gard 300 you sent. I followed your advice and the instructions provided. There were 3 or 4 bare spots. One was about 2 feet long and down to the fiberglass very ugly. The epoxy you recommended for the job was so easy to use. Saving me money. Thank you so much Virginia -- Key West (7/17)
|
|
Water Gard 300 (tm) Epoxy apply underwater touch- up epoxy |
|
|
|
ABOVE - before applying Water Gard 300 underwater |
|
|
|
ABOVE - after applying Water Gard 300 epoxy underwater |
|
"Thanks Paul - my 24 year old fiberglass pool looks new" --- Helen 5/18 |
|
order 1.5 quart light blue or white -- product web page -- call 603 435 7199 |
| Order this product (WATER GARD 300) by calling 603-435-7199 anytime or order online using this link: EPOXY NOW |
WE HAVE SEVERAL OTHER APPLY UNDERWATER EPOXIES - FOR A LIST CLICK HERE
|
Links for UNDERWATER EPOXY Application of DIY "underwater" epoxy paint and putty for repair and as an adhesive. Underwater swimming pool epoxy paint and repairs - Wet surface painting. Yes, you can apply some special epoxy paint/puttty coatings UNDERWATER
1) application of underwater epoxy paint (photograph) ----- uwpaint.html 2) underwater repair epoxy saves sinking yacht ----- cs_boat.html 3) history of underwater paint putty epoxy ----- uwhistory.html 4) description / buy links to underwater epoxy paint putty adhesive ----- under4u.html 5) epoxy and non epoxies that can be used (not applied) underwater ----- immerse.html Contact Page (phone or email us) Links to online storefront for buying UNDERWATER EPOXY Splash Zone A-788 -- Wet Dry 700 -- Corro Coat fc2100A -- Water Gard 300 |
