PROGRESSIVE EPOXY POLYMERS, INC.

 

Progressive Epoxy Polymers Inc. 603-435-7199

 

 

FAVORITE PRODUCTS WEB

SITE  --- this product:

 

ACRYLIC POLY UV PLUS

two part, clear, gloss, polyurethane with

massive amounts of UV blockers


RETURN TO FAVORITES PAGE -

THE MOST UNIQUE AND BEST SELLING

EPOXIES AND COATINGS


Acrylic Poly UV plus

protect your epoxy surfaces

and exterior surfaces from

UV damage


EMAIL / CALL /  BUY ONLINE

Our number is 603-435-7199 EST 24/7/365.

Call for help, support, questions, order products.

When you call one of three things will happen:

 

1) You will reach a real person.

2) You will get the answering machine if no one is here.

3) If the phone rings and rings, we are on the line with someone.

Call back in a few minutes.


Search for more pages on this product - Google Epoxy Only Site Engine



ACRYLIC POLY UV PLUS - More UV blockers and UV absorbers than any other clear, gloss 2 part poly. Compares to auto clear coat.

 

A two part acrylic polyurethane (LPU) clear coat which was especially formulated with max amount of UV blockers and absorbers to keep epoxy floors from UV related yellowing. Available in clear gloss. Coverage is about 300 square feet per gallon. Apply in thin coats with plenty of 'dry' time between coats. Handles moisture well.

Note that 2 part urethanes can be tricky/difficult to brush apply. They set up quickly on applied surfaces and can leave brush marks, even when special 'reducers' are used. If using a brush, have our 'slow' SU 93 reducer (see below) on hand, use a quality brush, and test your application first, in case you're not happy with the brushed on result (such as on boat hulls, poured on epoxy table tops, etc.). Always apply in very thin layers/coats. If not spray applied, google "Roll and Tip" for best application with roller and brush.

cannot be sold in California

 

 UV issues visit this page!


Data/MSDS sheets for this product


These products and two part poly options have a special set of web pages


Stopping UV damage and UV yellowing

 

  Josie Lewis (6/2010) wrote:

Hi Paul: I recently purchased some clear epoxy  and Acrylic Poly UV Plus from your company. I have access to a UV chamber which simulates high altitude direct UV exposure. I thought you might be interested in my findings. I used a Masonite panel painted white and then coated with the epoxy. On half of the epoxy coated panel, I brushed on one coat of UV Poly and put it in the chamber for 644 hours at 50 C (the heat accelerates the exposure). Attached is a picture of the results. The masonite cracked a bit and separated due to a bit of wetness in the wood (unrelated to the resin). The epoxy  ambered dramatically within about 50 hours. After 644 hours, the UV Poly showed a slight bit of ambering from the original control but it is marginal at worst. The technician who ran the test said if it isn't yellow at 644 hours it is basically indestructible. I also tested several other 2-part resin products with the UV Poly and had the same result. You have a great product. I now feel secure knowing that my resin art, protected with the Poly UV Plus, will be archival and protected for long years. I will be ordering more soon!

Best, Josie (6/2010)

 

Order Acrylic Poly UV plus - cannot be sold in Calif. - and all our other products at our King Cart Storefront. Acrylic poly UV Plus is in the non-epoxy section.


 

 

Save over 50% (hundreds of dollars!) On 2-Part Marine Topsides Paint

Two part polyurethane paints are the best of user applied coatings. Automobiles and fine yachts use them We offer two outstanding products. One is a snowy white yacht coating (LPU Marine) and the other is a Clear with massive UV protection (something not often found in even the most expensive two-part polys - auto clear coat being the exception). More on 2 part polys - CLICK HERE

We checked the prices for similar Awgrip brand polys at discount marine supply store WEST MARINE (Feb 2019). Their polyester polyurethane white sells for $280 per gallon. (that’s $420 for 1.5 gallons - vs. $199 for our 1.5 gal package). Use our LPU Marine polyester poly and save 53%.

Our clear acrylic poly (Acrylic Poly UV Plus) vs. their clear Awlcraft 2000 clear acrylic poly (which doesn’t have the UV blockers and absorbers that our product does - a really valuable addition) - sells for $149 per gallon vs. their price of $270 per gallon.

Let's talk! - 503-435-7199

 


EMAIL / CALL 603-435-7199 /  BUY ONLINE


RETURN TO FAVORITES PAGE - THE MOST UNIQUE AND BEST SELLING EPOXIES AND COATINGS


All of these FAVORITE PRODUCTS, except for Aluthane ™, India Spar Varnish  and  ESP 155, and Acrylic Poly UV Plus

can be purchased at our simple web site EpoxyUSA.com .

To purchase Aluthane or ESP 155 or India Spar Varnish goto our primary web storefront .

Search EPOXY ONLY GOOGLE for all of these products - CLICK


 

Let's stay connected. It's a win-win situation. Receive our online NEWSLETTER by emailing us your name and email address.

 


Search for more pages on this product - Google Epoxy Only Site Engine



Progressive Epoxy Polymers, Inc.  Pittsfield, NH 02363  - 603-435-7199 - email -

EPOXY PAINTS AND RESIN SYSTEMS - 1 AND 2 PART URETHANES - COATING SUPPLIES



 

\

 

 

 

 

 

 

 

 

 



Navigation Bar frame replacement CLICK HERE mobile friendly key site links